GE IS420YAICS1B Analog I/O Module for Mark VIeS Systems

The IS420YAICS1B represents General Electric's precision analog interface solution for demanding industrial applications. This advanced I/O module delivers exceptional signal accuracy and reliability in Mark VIeS control environments.

Technical Specifications & Performance Data

• Manufacturer: General Electric
• Part Number: IS420YAICS1B
• Series: Mark VIeS Control System
• Analog Input Channels: 10 total configurable inputs
• Input Types: 8 channels (5V/10V/4-20mA), 2 channels (1mA/0-20mA)
• ADC Resolution: 16-bit high-precision conversion
• Measurement Accuracy: ±0.1% of full scale rating
• Common Mode Rejection: 60 dB at 60 Hz AC
• Operating Temperature: -40°F to 158°F wide range
• Power Consumption: 5.3 watts typical operation

Signal Processing & Filtering Capabilities

• Hardware filtering with 500 rad/s single-pole attenuation
• Software configurable two-pole low-pass filters
• Filter cutoff frequencies: 0.75, 1.5, 3, 6, and 12 Hz
• Common mode voltage tolerance: ±5 V maximum
• Input impedance: 1 MΩ for voltage inputs
• Sampling rate: 1000 samples per second per channel
• Signal-to-noise ratio: >80 dB typical performance

Hardware Configuration & Connectivity

• Processor Board: BPPC with advanced processing capabilities
• Ethernet Ports: Dual RJ-45 connectors for network redundancy
• Power Input: 3-pin connector with 28 VDC requirement
• Data Interface: DC-37 pin terminal board connection
• Physical Dimensions: 3.25" H × 1.65" W × 4.78" D
• Mounting: DIN rail compatible with secure locking
• LED Indicators: Multi-status visual diagnostics

Installation & Configuration Steps

• Securely mount the compatible terminal board in enclosure
• Connect YAIC I/O pack directly to terminal board connector
• Use threaded studs for mechanical stability and vibration resistance
• Connect Ethernet cables to ENET1 and ENET2 ports as needed
• Apply 28 VDC power through the 3-pin power connector
• Configure analog input types using ControlST software
• Set filter parameters and scaling for each input channel

System Integration & Compatibility

• ControlST Software: Version V06.01 or later required
• Firmware Version: V05.01 or newer must be installed
• Terminal Boards: Compatible with TBAISIC and STAIS2A
• Redundancy: Supports simplex and TMR configurations
• Network Protocol: Standard industrial Ethernet
• Processor: BPPC board with lifecycle management

Packaging & Shipping Details

• Product includes IS420YAICS1B module only
• Anti-static protective packaging materials
• Shock-absorbent foam inserts for transport safety
• Same-day dispatch for orders before 3:00 PM
• Express courier options: FedEx, UPS, DHL available
• Online tracking information provided automatically

Expert Technical FAQ

• What input signal types does the module support?

The module handles voltage inputs (5V, 10V) and current inputs (1mA, 4-20mA) across ten channels with individual configuration.

• Can I mix different YAIC versions in one system?

No, TMR configurations require identical hardware versions and cannot mix IS420YAICS1A and IS420YAICS1B modules.

• What diagnostic capabilities are built-in?

The module performs power-up self-tests for memory, hardware, Ethernet ports, and continuous power supply monitoring.

• How accurate are the analog measurements?

Accuracy is ±0.1% of full scale across the entire operating temperature range with 16-bit resolution.

• What warranty coverage do you provide?

We offer comprehensive 12-month warranty protection from the original purchase date.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Phone: +86 180 3000 5825