Bently Nevada Velomitor Piezo-Velocity Sensor

The 330500-06-00 measures vibration with high accuracy. This industrial sensor works in tough conditions. It provides reliable data for machine protection systems.

Product Configuration Details

• Base Model: 330500 Velomitor Sensor
• Mounting Thread: 06 - 5/8-18 UNF
• Agency Approval: 00 - Standard Version

Technical Performance Data

• Sensitivity: 100 mV/in/s ±5% at 100 Hz
• Frequency Range: 4.5 Hz to 5,000 Hz
• Velocity Range: 50 in/s peak maximum
• Operating Temperature: -55°C to +121°C
• Shock Survival: 5,000 g peak rating
• Output Impedance: Less than 2,400 ohms
• Noise Floor: 160 μin/s RMS typical
• Resonant Frequency: Above 12,000 Hz
• Case Material: 316L stainless steel
• Weight: 142 grams (5.0 ounces)

Key Product Advantages

• Hermetically sealed case for 100% humidity
• Wide frequency range from 4.5 Hz to 5 kHz
• Extreme temperature operation capability
• High shock resistance up to 5,000 g
• Low transverse sensitivity below 5%
• 316L stainless steel construction
• Military-grade connector system
• Multiple hazardous area certifications

Installation Guidelines

• Use 5/8-18 UNF mounting thread
• Apply 24-40 in-lb maximum torque
• Maximum cable length 305 meters
• Case isolated from ground
• Recommended cable: 02173006 type

Certifications & Approvals

• FCC Part 15 compliant
• EMC Directive 2014/30/EU
• RoHS Directive 2011/65/EU
• DNV maritime certifications
• ATEX and IECEx hazardous area

Shipping & Service

• 12-month manufacturer warranty
• FedEx, UPS, DHL express delivery
• 3-5 business day shipping
• International shipping available

Frequently Asked Questions

• What is the minimum frequency this sensor can measure?
• It measures down to 4.5 Hz with ±3 dB accuracy. This covers most low-speed machinery.
• Can this sensor work in wet environments?
• Yes, the hermetically sealed case works in 100% humidity. It is waterproof but not for submerged use.
• What cable length can I use with this sensor?
• You can use up to 305 meters without signal loss. The recommended cable is part number 02173006.
• Is this sensor suitable for hazardous areas?
• Yes, it has ATEX and IECEx certifications. It works in Class I Division 1 and 2 areas.
• What maintenance does this sensor require?
• It needs no regular maintenance. Just check the mounting torque during routine inspections.

Contact:sales@ubestplc.com | +86 18030005825

© 2025 Ubest Automation Limited. All rights reserved.
Original Source:https://www.ubestplc.com/
Partners:Powergear X Automation Limited