Mitsubishi MR-J3ENSCBL30M-L Encoder Cable: Long-Reach 30m IP67 Link

Bridge long distances with reliable signals. The Mitsubishi MR-J3ENSCBL30M-L is a 30-meter encoder cable offering IP67 protected connectivity for extended runs in demanding industrial environments.

Key Features for Long-Distance Installation

• Extended Length: 30-meter cable for flexible, long-distance system layout.
• Environmental Protection: IP67 rating resists dust and temporary water immersion.
• Wide Compatibility: Standard connector for MELSERVO-J3 series servo systems.
• Robust Construction: Built with standard materials for durability and reliable signal integrity.
• Broad Temperature Range: Operates in 0°C to 55°C, stores from -20°C to 75°C.

Complete Technical Specifications

Brand: Mitsubishi Electric

Series: MELSERVO-J3 Series

Model: MR-J3ENSCBL30M-L

Part Number: MR-J3ENSCBL30M-L

Cable Type: Encoder Feedback Cable

Length: 30 Meters

Protection Rating: IP67 (Dust-tight and protected against temporary immersion)

Flexibility: Standard Flex

Shielding: Yes, for electromagnetic interference (EMI) protection

Operating Temperature: 0°C to +55°C

Storage Temperature: -20°C to +75°C

Logistics Class: Class A (High-quality standard)

Connectors: Standard Mitsubishi servo encoder connectors.

Weight: Varies with length; robust construction.

FAQ – Long Cable Runs & Installation

Is signal quality maintained over the full 30-meter length?

Yes, the cable is designed and shielded to maintain encoder signal integrity over this distance for Mitsubishi J3 series systems. For runs beyond 30m, verify system specifications or consider signal amplifiers.

How do I ensure the IP67 seal is effective over such a long cable?

The IP67 rating applies to the connector junctions. Ensure both ends are fully mated, locked, and the cable gland (if present) is properly tightened. Regularly inspect seals for damage in harsh environments.

Can I run this cable in a cable carrier (drag chain)?

Its "Standard Flex" rating is for fixed installation or gentle bending. For continuous movement in a cable carrier, you must use a cable specifically rated for "High-Flex" or "Continuous Flex" applications.

What is the main concern when routing 30m of cable?

Avoid running it parallel to high-voltage power cables over long distances. If crossing is necessary, do so at a 90-degree angle to minimize induced electrical noise on the encoder signals.

The cable feels stiff. How should I handle it during installation?

Uncoil it fully without kinking. Use wide-radius bends (minimum bend radius is typically 10x the cable diameter). Avoid sharp bends or crushing, which can damage internal wires and the shield.

Package & Service Information

Package Includes: 1 x Mitsubishi MR-J3ENSCBL30M-L Encoder Cable (30 meters).

Warranty: Covered by a 12-month warranty against manufacturing defects.

Shipping: Safely shipped in a coil or spool via global carriers FedEx, UPS, and DHL.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825