Robust DRIVE-CLiQ Connectivity with the Siemens 6FX8002-2DC10 Cable

The Siemens 6FX8002-2DC10 is a pre-assembled, high-performance signal cable. It provides a reliable DRIVE-CLiQ connection in demanding motion control systems. This cable features different protection ratings on each end for optimal integration. It is a key component within the MOTION-CONNECT 800PLUS cabling system for Siemens drives.

Product Identification & Core Specification

• Ordering Number: Siemens 6FX8002-2DC10 (Full article number: 6FX80022DC101BG0).
• Primary Application: Connects SINAMICS S120 Motor Modules to DRIVE-CLiQ networks.
• System Compatibility: Designed for use with SINUMERIK 840D sl and SINAMICS S120 drive systems.
• Cable Type: Pre-assembled, shielded signal cable for noise immunity in industrial environments.
• Product Status: Active product (PLM PM300), ensuring full manufacturer support and availability.

Connector Specifications & Environmental Protection

• Module-Side Connector: 24V RJ45 plug with an IP20 protection rating for cabinet interior use.
• Motor-Side Connector: Designed with an IP67 rating for direct exposure to dust and water jets.
• Connection Standard: Utilizes the standardized DRIVE-CLiQ interface for digital drive communication.
• Sealing Integrity: The IP67 motor-side end protects against oil, coolant, and washdown conditions.

Electrical & Mechanical Characteristics

• Maximum Released Length: Certified for reliable signal integrity up to a length of 75 meters.
• Cable Diameter: Maximum outer diameter (Dmax) of 7.1 mm for easy routing in cable carriers.
• Length Tolerance: Manufacturing tolerance adheres to a precise specification for consistent installation.
• Shielding: High-quality shield provides effective protection against electromagnetic interference (EMI).

Packaging, Logistics & Compliance

• Net Weight: Approximately 2.463 pounds (about 1.12 kilograms) per unit.
• Packaging Unit: Sold as 1 piece per package for individual order fulfillment.
• Country of Origin: Manufactured in Slovakia, ensuring high European production standards.
• Commodity Code: Classified under HS code 85444290 for insulated electric conductors.
• WEEE Compliance: Subject to EU Take-Back Obligation (2012/19/EU) for proper recycling.

Delivery, Support & Installation Notes

• Standard Lead Time: Typical delivery ex-works is within 15 business days.
• System Series: Part of the Siemens MOTION-CONNECT 800PLUS family of pre-assembled cables.
• Installation Guideline: Follow Siemens manuals for proper strain relief and bending radius.

What's Included & Service Information

• Package Contents: Includes one complete pre-terminated DRIVE-CLiQ cable, ready for installation.
• Product Warranty: This cable is covered by a standard 12-month warranty from the invoice date.
• Shipping Options: Available for international shipment via FedEx, UPS, and DHL express services.

Expert Application & Selection FAQs

• Why does this cable have different IP ratings (IP20 vs IP67) on each end?
• The IP20 end connects inside the protected control cabinet. The IP67 end connects directly to the motor or sensor on the machine, which faces dust, fluids, and washdown, requiring a sealed connection.
• Can I safely cut and re-terminate this cable to a custom length?
• No, you must not modify this pre-assembled cable. The connectors are factory-molded for integrity. Cutting it voids the warranty and certification. Always order the standard length or a custom length from Siemens.
• What is the significance of the "75m released length" specification?
• Siemens has tested and validated this cable model for stable DRIVE-CLiQ communication up to 75m. Exceeding this distance can cause signal degradation, communication errors, or drive faults. For longer runs, consult Siemens for alternative solutions.
• Is this cable compatible with older SINAMICS S110 drives?
• The 6FX8002-2DC10 uses the standard DRIVE-CLiQ interface. It is physically compatible, but you must verify functional compatibility in the specific S110 hardware manual, as some early firmware versions may have limitations.
• How should I manage the bending radius when installing this in a cable chain?
• Adhere to a minimum bending radius of 10x the cable diameter (approx. 71mm) during static installation. For continuous movement in a cable carrier, refer to the more stringent dynamic bending radius specified in the Siemens installation guide to prevent shield damage.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Phone: +86 180 3000 5825