Bently Nevada 3300 NSv Proximity Probe

Meet the 330904-08-10-10-11-05 probe. It is new and original. It comes sealed in its factory package. This Bently Nevada probe gives you strong chemical resistance. It is a direct upgrade for older 3300 RAM systems. It fits right into your existing setup. Perfect for tough jobs on process compressors.

Understanding Your Part Number: 330904-08-10-10-11-05

Every part of the number tells a story:

• 330904: The base model code.
• -08-: Means an 80 mm unthreaded section.
• -10-: Means a 100 mm total case length.
• -10: Means a 1.0 meter (39 inch) cable.
• -11-: ClickLoc connector with a protective cover.
• -05: Meets multiple agency approval standards.

Key Technical Details

• Brand: Bently Nevada
• Model: 3300 NSv Proximity Probe
• Your Part: 330904-08-10-10-11-05
• Measuring Range: 1.5 mm (60 mils)
• Best Gap: 1.0 mm (40 mils)
• Output: -1 to -13 Vdc
• Scale Factor: 7.87 V/mm (200 mV/mil)
• Work Temperature: -52°C to +177°C
• Probe Resistance: 4.2 Ω ± 0.5 Ω
• Case Material: 304 Stainless Steel
• Tip Material: PPS Plastic
• Min Target Size: 13 mm (0.5 in) diameter
• Frequency: 0 to 10 kHz

How To Install

• Turn the probe by hand until it is finger tight.
• Never use more than 0.56 N•m (5 in•lb) of force.
• Keep the cable bend over 1.0 inch.
• Set the gap to 1.0 mm (40 mils) from the target.
• The target should be at least 13 mm (0.5 in) across.

Will It Work For You?

Yes. This 3300 NSv probe works with older 3300 RAM systems. The connectors and signals are the same. You can mix them without any problems.

What You Get

• One Bently Nevada 330904-08-10-10-11-05 Probe.
• It is new and comes in the original box.
• Your order is protected by a 12 month warranty.
• We ship fast using FedEx, UPS, and DHL.

Want the full manual? Get all the details from the official datasheet.
Download The Full Guide Here