Siemens 6FX8002-2DC10-1BB0 Motor Cable | RJ45 DRIVE-CLiQ
UBEST – Αξιόπιστος Παγκόσμιος Προμηθευτής Ανταλλακτικών Αυτοματισμού
Προσφέρουμε μια μεγάλη γκάμα διαθέσιμων ανταλλακτικών βιομηχανικού αυτοματισμού. Όλα τα προϊόντα συνοδεύονται από 12μηνη εγγύηση και 30ήμερη επιστροφή χρημάτων για θέματα ποιότητας.
Siemens 6FX8002-2DC10-1BB0: Advanced DRIVE-CLiQ Motor Cable
This is a high-performance signal cable for modern drive systems. It uses RJ45 connectors for a secure link. One end is IP20 for inside the cabinet. The other end is IP67 for tough motor environments. The cable length is 10 meters.
Top Reasons to Choose This Cable
- Modern RJ45 Interface: Familiar, robust connector for reliable data.
- Motor-Side Protection: IP67 rating shields against water and dust.
- Long-Distance Ready: Part of MOTION-CONNECT 800PLUS series for runs up to 75m.
- Integrated Power Lines: Carries 24V power for device operation.
- Perfect Fit: Designed for SINAMICS S120 and SINUMERIK 840D sl systems.
Full Product Specifications
Siemens Part Number: 6FX8002-2DC10-1BB0
Product Series: MOTION-CONNECT 800PLUS
Cable Type: Pre-assembled DRIVE-CLiQ Signal Cable
Compatible Systems: SINAMICS S120 Motor Module, SINUMERIK 840D sl
Total Length: 10 meters
Maximum System Length: Certified for use up to 75 meters total.
Connector Type: RJ45 (8P8C)
Connector Protection: Module side: IP20 | Motor side: IP67
Cable Diameter (Dmax): 7.1 mm
Special Function: Includes wires for 24 Volt DC supply.
Signal Type: High-speed digital for real-time drive communication.
Shielding: High-grade shielding for excellent EMI/RFI noise immunity.
Bending Radius (min): 10 x cable diameter for fixed installation.
Operating Temperature Range: -25°C to +80°C (Fixed), -5°C to +70°C (Flexing)
Net Weight: 0.777 kg
Unit Quantity: 1 Piece per package.
Environmental Standard: Complies with RoHS directives.
Origin: Manufactured in Slovakia.
Frequently Asked Questions
Q: Is this cable with RJ45 connectors compatible with standard network cables?
A> No. While it uses an RJ45 physical connector, the wiring and signal protocol are specific to Siemens DRIVE-CLiQ. Using a standard Ethernet cable can damage your drive equipment.
Q: Can I use this 10m cable to connect devices that are 70 meters apart?
A: The 10m cable is one segment. The MOTION-CONNECT 800PLUS system allows a total cable length of up to 75 meters between the controller and the final device, which can be made of several cable segments connected in series.
Q: What is the main difference between MOTION-CONNECT 500 and 800PLUS cables?
A: The 800PLUS series (like this 6FX8002 cable) generally supports longer total cable runs (up to 75m vs. 50m for some 500 series) and uses different connector technology for potentially higher performance and reliability.
Q: How do I secure the IP67 connector on the motor in a wet area?
A: The IP67 connector has a screw-lock coupling mechanism. After plugging it in, turn the locking ring clockwise until it is hand-tight. This creates a seal that meets the IP67 protection standard.
Q: My system uses an older style DRIVE-CLiQ connector. Can I use this cable?
A> Likely not. This 6FX8002 cable with RJ45 connectors is for newer generations of S120 hardware. Check your motor module and control unit's manual for the correct connector type before ordering.
What's Included
1 x Siemens 6FX8002-2DC10-1BB0 DRIVE-CLiQ Cable, 10 meters long.
Delivery & Warranty Terms
Express Shipping: Available for quick delivery via FedEx, UPS, or DHL.
Warranty Protection: Includes a full 12-month product warranty from the delivery date.
© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825