Siemens 6ES7232-4HD32-0XB0 SIMATIC S7-1200 Analog Output Module

This precision analog module adds versatile output capability to your S7-1200 system. The 6ES7232-4HD32-0XB0 delivers accurate control signals for various industrial applications.

Complete Technical Specifications

• Manufacturer & Model: Siemens 6ES7232-4HD32-0XB0
• Product Type: SM 1232, Analog Output Module (4 channels)
• Module Type: Signal Module (SM) for S7-1200 PLC systems
• Number of Outputs: 4 analog outputs, individually configurable
• Output Ranges: Voltage: -10V to +10V; Current: 0-20mA or 4-20mA
• Resolution: Voltage: 14-bit; Current: 13-bit
• Accuracy (at 25°C): ±0.3% of output range (both voltage and current)
• Temperature Drift: ±0.3% at 25°C to ±0.6% at 55°C
• Load Requirements: Voltage: min. 1kΩ; Current: max. 600Ω
• Cable Length: Up to 100m with shielded twisted pair cable
• Supply Voltage: 24V DC (via system power or external)
• Power Consumption: 45 mA from 24V, 80 mA from backplane 5V (1.5W typical)
• Operating Temperature: -20°C to 60°C (horizontal), -20°C to 50°C (vertical)
• Protection Rating: IP20
• Dimensions (W x H x D): 45 x 100 x 75 mm
• Weight: Approximately 180 grams

Diagnostic & Monitoring Features

• Status LEDs: Individual indicators for output status and maintenance alerts
• Fault Detection: Wire-break, short-circuit, and underload detection
• Supply Monitoring: Continuous monitoring of the 24V supply voltage
• Diagnostic Alarms: Configurable diagnostic messages in the PLC program

Package & Shipping Information

• One Siemens SM 1232 Analog Output Module (6ES7232-4HD32-0XB0)
• Required front connector for wiring (included)
• Industrial protective packaging for safe transit
• Global shipping via FedEx, UPS, or DHL with tracking

Warranty & Support

• Standard 12-month warranty against manufacturing defects
• Technical support for configuration and troubleshooting
• Quality assurance for reliable industrial performance

Frequently Asked Questions (FAQ)

• What types of devices can I control with this module? You can control variable frequency drives, proportional valves, chart recorders, and any device accepting standard 0-20mA, 4-20mA, or ±10V control signals.
• Can I mix voltage and current outputs on the same module? Yes, each of the four channels is independently configurable. You can have two voltage outputs and two current outputs simultaneously in any combination.
• How do I configure the output ranges in my PLC program? Configure the module in TIA Portal's device configuration. Select each channel's type (voltage/current) and range, then use the standard analog output instructions in your logic.
• What happens if the load resistance is outside specifications? Outside specifications may cause inaccurate output or module faults. Always verify your load impedance matches the module requirements before installation.
• Is shielded cable really necessary for analog signals? Yes, shielding is critical for analog signals to prevent electrical noise interference. Use proper grounding techniques at both ends for best signal integrity.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Phone: +86 180 3000 5825