Siemens 6ES7532-5HD00-0AB0: Precise 4-Channel Analog Output Module

Control your actuators with precision. The Siemens 6ES7532-5HD00-0AB0 is a SIMATIC S7-1500 analog output module. It offers 4 channels for voltage or current signals with 0.3% accuracy and supports safety shutdowns up to SIL 2.

Get Started in Minutes

• Install the module on your S7-1500 PLC rack.
• Connect your valves, drives, or controllers to the front connector (sold separately).
• Use the included shield bracket for clean signals.
• Configure in TIA Portal software (V12 or newer).
• Set output type (voltage or current) and safe substitute values for each channel.

Complete Technical Specifications

Product Model: Siemens 6ES7532-5HD00-0AB0 (AQ 4xU/I ST)
Module Type: Analog Output Module, Standard.
Channels: 4 independent output channels.
Output Types: Voltage: 0-10V, ±10V, 1-5V. Current: 0-20mA, 4-20mA, ±20mA.
Resolution & Accuracy: High 16-bit resolution, ±0.3% total error.
Supply Voltage: 24V DC (19.2V to 28.8V range).
Load Capacity: Voltage: Min. 1 kΩ. Current: Max. 750 Ω.
Response Speed: Fast 0.5 ms conversion time per channel. Settles in 1.5 ms.
Diagnostics: Wire-break (current), short-circuit (voltage), supply monitoring.
Safety Function: Supports safety shutdown up to SIL 2 / PL d / Cat. 3.
Cable Length: Up to 800m shielded (current), 200m (voltage).
Wide Temp Range: Operates from -30°C to 60°C.
Dimensions: Compact 35mm W x 147mm H x 129mm D. Weight: ~310g.

Expert FAQs for Your Application

What can I connect to this output module?
You can control devices like variable speed drives (0-10V), proportional valves (4-20mA), or chart recorders. It provides the precise signal they need to operate.

How does the "substitute value" function work?
If the PLC detects a fault, you can pre-set a safe output value (like 0V or 20mA). The module will hold this value to keep your process in a safe state.

What is the difference between two-wire and four-wire voltage connection?
Use a two-wire connection for simple setups. For high-precision control over long cables, a four-wire (sense) connection compensates for voltage drop in the wires.

Can it be used in safety systems?
Yes, from hardware version FS05. It can be part of a safety circuit to shut down a load group, meeting standards like ISO 13849-1 up to Category 3.

What happens if the output wire breaks?
For current outputs (4-20mA), the module can detect a wire break and trigger a diagnostic alarm, alerting you to the problem.

Your Assurance & Delivery

This module comes with a reliable 12-month product warranty. We ship internationally using premium carriers: FedEx, UPS, and DHL for timely delivery.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Phone: +86 180 3000 5825