SICK SX0A-B0910B System Plug with 10m Cable

The SICK SX0A-B0910B is a pre-assembled system plug and cable accessory. This cable connects S3000 safety light curtains to their control system. It features a 10-meter long cable with nine individual wires inside. The SX0A-B0910B simplifies installation and ensures a reliable connection.

Product Overview & Key Specifications

• Brand: SICK
• Part Number: SX0A-B0910B
• Accessory Group: Plug Connectors and Cables
• Product Description: Pre-assembled System Plug with Cable
• Compatible Systems: S3000 Standard and S3000 Remote Series
• Cable Length: 10 Meters
• Number of Conductors: 9 Wires
• Cable Jacket Material: PVC (Polyvinyl Chloride)
• Shielding: Unshielded Cable Construction
• Special Feature: Integrated Configuration Storage

Cable & Connection Details

• Connection Type A: System Plug (M23 style connector typical)
• Connection Type B: Flying Leads for control box termination
• Conductor Gauge: Standard signal wire size for data and power
• Cable Color: Typically orange or black for safety system visibility
• Bending Radius: Minimum bending radius as per PVC cable standards
• Electrical Rating: Rated for 24V DC signal and low-current power

Important Usage Notes & Limitations

• Critical Restriction: NOT for use with incremental encoders
• Configuration: Carries device configuration via integrated storage
• Environmental Use: Designed for indoor/industrial cabinet use
• Installation: Pre-assembled plug ensures correct pin alignment
• Application: Dedicated for safety system signal transmission

Included Accessories (Packaging List)

• Cable Gland: 1 x M20 Cable Gland for enclosure entry
• Blanking Plug: 1 x M20 Blanking Plug (for unused entry)
• Additional Plugs: 2 x M12 Blanking Plugs
• Primary Product: 1 x SX0A-B0910B System Plug with 10m Cable
• Packaging: Protective plastic bag or box

Installation & Mounting Guide

• Route the 10-meter cable from the S3000 light curtain to the evaluation unit.
• Use the included M20 cable gland to secure the cable at the control box entry.
• Connect the system plug end firmly into the port on the safety light curtain.
• Strip the flying leads and connect them to the correct terminals in the control box.
• Follow the S3000 manual for the exact wiring diagram (e.g., +24V, 0V, OSSD outputs).
• Use the M20 and M12 blanking plugs to seal any unused ports on the devices.
• Ensure the cable is not subjected to sharp bends, tension, or excessive heat.

Shipping & Delivery Information

• Shipping Unit: Single piece per package
• Carrier Options: FedEx, UPS, and DHL services available
• International Delivery: Available to most countries
• Packaging Protection: Standard industrial packaging

Warranty & Support

• Warranty Term: 12-month warranty against manufacturing defects
• This accessory warranty is valid from the original purchase date.
• Professional technical support is available for integration questions.
• Always verify compatibility with your specific S3000 model before installation.

Frequently Asked Questions (FAQ)

• Why is this cable not suitable for incremental encoders?

Encoders require shielded, twisted-pair cables for high-frequency pulse signals to prevent noise. This unshielded PVC cable is designed for lower-speed safety signals and device configuration data.

• What is the "integrated configuration storage"?

Some SICK safety devices store their configuration (like blanking patterns) in a memory chip within this system plug. This allows you to replace a sensor head without re-programming by using the same cable.

• Can I cut and splice this 10m cable if it's too long?

We do not recommend cutting or splicing. It is a pre-assembled unit. Altering it can damage the integrated wiring, invalidate the warranty, and potentially compromise the safety system's integrity.

• What do I use the included M12 blanking plugs for?

The S3000 sensor may have unused M12 auxiliary ports (e.g., for daisy-chaining). The blanking plugs seal these ports to maintain the device's IP (Ingress Protection) rating against dust and moisture.

• Is the PVC jacket suitable for use in wet areas?

The PVC jacket provides basic protection, but the cable is unshielded and the system plug may not be submersible. For wet environments, the entire safety system (sensor and cable entry) must be installed according to a suitable IP rating using enclosures.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Phone: +86 180 3000 5825