Bently Nevada 31000-16-10-00-159-00-02 — Deep Reach Housing for 8mm Probes

Product Identity & Suffix Decoder

Brand: Bently Nevada
Family: 31000 Series
Type: Proximity Probe Housing Assemblies
Origin: Made in U.S.A.

31000-16-10-00-159-00-02
 ├─ 16 ── Probe = 3300 XL 8mm, w/ connector
 ├─ 10 ── Cable = 1.0 meter (39 inches)
 ├─ 00 ── Standoff = None
 ├─ 159 ─ Penetration = 15.9 inches
 ├─ 00 ── Fittings = Not included
 └─ 02 ── Mount = 3/4-14 NPT

Core Technical Performance

Probe Compatibility: Accepts 3300 XL 8mm proximity probes only.
System Linearity: Maintains ±0.3% deviation across full measurement range.
Frequency Response: Supports 0 to 10 kHz dynamic motion capture.
Sensitivity: Delivers 7.87 mV/µm standard output scaling.
Resolution: Achieves 0.1 µm precision for微小 displacement detection.
Electrical Noise Rejection: Shielded design attenuates 60 Hz interference by 50 dB.
Thermal Stability: Sensitivity drift below ±0.5% from -35°C to +105°C.

Environmental & Mechanical Durability

Enclosure Protection: Type 4X and IP66 certified against water jets.
Hazardous Area: EN50014 certified for electrostatic discharge safety.
Shock Resistance: Survives 7 Joule impacts at room temperature per CSA.
Thermal Cycling: Operates from -51°C to +105°C without degradation.
Material Strength: PPS thermoplastic withstands industrial chemicals.
Corrosion Resistance: All exposed hardware uses 303/304 stainless steel.
Seal Integrity: Viton and Neoprene O-rings prevent moisture entry.

Professional Technical FAQ

1. What is the maximum cable length for this housing?
The assembly includes a 1.0 meter probe cable. For longer runs, use Bently Nevada extension cables up to 305 meters.

2. Can this housing withstand washdown procedures?
Yes. IP66 and Type 4X ratings guarantee protection against high-pressure hose-directed water.

3. Does the 15.9 inch penetration affect measurement accuracy?
No. Bently Nevada designs the 3300 XL probe tip independently of housing length. Accuracy remains constant.

4. What torque should I apply to the NPT fitting?
Hand-tighten plus 1.5 turns with a strap wrench. Avoid overtightening the plastic housing.

5. Is the connector protector included?
No. This model uses the standard 3300 XL probe without the optional connector protector.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com Phone: +86 86 180 3000 5825