3300 NSv Proximity Probe 330904-00-10-10-02-00 Bently Nevada
UBEST – Pouzdani globalni dobavljač dijelova za automatizaciju
Nudimo širok asortiman industrijskih rezervnih dijelova za automatizaciju na skladištu. Svi proizvodi dolaze s 12-mjesečnim jamstvom i 30-dnevnim povratom novca zbog problema s kvalitetom.
Bently Nevada 3300 NSv Proximity Probe
Get the 330904-00-10-10-02-00 probe for your machinery. This probe is new and comes in original factory packaging. It measures vibration and position on rotating equipment. It offers excellent chemical resistance. Use it in process compressors. The 3300 NSv probe works with older 3300 RAM systems.
Key Product Details
- Brand: Bently Nevada
- Model: 3300 NSv Proximity Probe
- Full Part Number: 330904-00-10-10-02-00
- Condition: New & Original
- Includes a full 12-month warranty
- Worldwide shipping via FedEx, UPS, DHL
Understanding Your Model Number
- 330904: 3300 NSv Probe with armor, M8x1 thread
- -00-: Unthreaded Length: 00 mm
- -10-: Overall Case Length: 100 mm
- -10: Total Cable Length: 1.0 meter
- -02: Connector: Miniature ClickLoc, standard cable
- -00: Agency Approvals: Not required
Technical Specifications
- Linear Range: 1.5 mm (60 mils)
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Output Signal: -1 to -13 Vdc
- Frequency Response: 0 to 10 kHz
- DC Resistance: 4.2 ± 0.5 ohms
- Min. Target Size: 8.9 mm diameter
- Operating Temp: -52°C to +177°C
- Probe Tip: Polyphenylene sulfide (PPS)
- Case Material: AISI 304 Stainless Steel
- Max Torque: 0.56 N•m (5 in•lb)
- Min. Bend Radius: 25.4 mm (1.0 in)
Installation Guide
- Set gap to 1.0 mm (40 mils) from target.
- Use a flat target with 13 mm diameter.
- Hand tighten only. Do not use tools.
- Max torque is 0.56 N•m (5 in•lb).
- Minimum bend radius is 25.4 mm.
- Max field wiring length is 305 meters.
Compatibility Information
This 3300 NSv probe is a direct replacement. It fits older 3300 RAM systems. The electrical and mechanical specs are the same. You get better chemical resistance.
What You Get
- One Bently Nevada 330904-00-10-10-02-00 Probe
- Original factory packaging
- 12-month product warranty
Frequently Asked Questions
- What is the cable length? The total probe length is 1.0 meter.
- What connector does it use? It uses a Miniature ClickLoc connector.
- Is it pressure rated? It has a Viton O-ring seal. It is not pressure tested.
- What is the minimum target size? The absolute minimum is 8.9 mm.
- Can I use it in high temperatures? Yes, it works up to 177°C (351°F).
Need the full manual? Get the complete datasheet for all technical data and wiring diagrams.