3300 NSv Proximity Probe Bently Nevada 330904-00-10-05-11-05
UBEST – Pouzdani globalni dobavljač dijelova za automatizaciju
Nudimo širok asortiman industrijskih rezervnih dijelova za automatizaciju na skladištu. Svi proizvodi dolaze s 12-mjesečnim jamstvom i 30-dnevnim povratom novca zbog problema s kvalitetom.
Bently Nevada 3300 NSv Proximity Probe
Get the 330904-00-10-05-11-05 NSv Proximity Probe from Bently Nevada. This sensor is perfect for tough industrial jobs. It is new and original in factory packaging. It comes with a full 12-month warranty. This version has special FluidLoc cable for wet areas. It works great in process compressors.
Understanding Your Model Number: 330904-00-10-05-11-05
- Base Model: 330904 (M8X1 Thread with Armor)
- First Code (-00): 0 mm Unthreaded Length
- Second Code (-10): 100 mm Overall Case
- Third Code (-05): 0.5 Meter Cable Length
- Fourth Code (-11): ClickLoc Connector with FluidLoc Cable
- Fifth Code (-05): Multiple Agency Approvals
Detailed Technical Specifications
- Brand: Bently Nevada
- Model: 3300 NSv Proximity Probe
- Your Part Number: 330904-00-10-05-11-05
- Measurement Range: 1.5 mm (60 mils)
- Output: -1 to -13 Vdc
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Best Gap Setting: 1.0 mm (40 mils)
- Temperature Range: -52°C to +177°C
- Cable Type: FluidLoc, 75 Ohm Coaxial
- Connector: Miniature Coaxial ClickLoc
- Probe Resistance: 4.0 ± 0.5 ohms
- Minimum Target: 13 mm (0.5 in) diameter
- Frequency Response: 0 to 10 kHz
How To Install
- Turn the probe finger tight only.
- Do not use more than 0.56 N•m (5 in•lb) of force.
- Keep cable bends wider than 25.4 mm (1.0 in).
- Point the probe at a flat spot at least 13 mm (0.5 in) wide.
Will It Work With My Old System?
Yes. This 330904 NSv probe replaces old 3300 RAM probes. The connectors and signals are the same. It is a direct swap.
What You Will Get
- One new Bently Nevada 3300 NSv probe.
- All original factory packaging.
- A full 12-month product warranty.
We ship quickly worldwide using FedEx, UPS, and DHL.
Frequently Asked Questions
- What is FluidLoc cable? It is a special cable that resists oil, water, and chemicals. It is perfect for messy environments.
- Can I use this on a small shaft? Yes, but for shafts under 13mm, set a smaller gap to keep readings accurate.
- How long can my cable be? You can use up to 305 meters (1000 feet) of field wiring with this probe.
- Is the tip durable? Yes. The tip is made of strong PPS plastic that handles chemicals well.
- What is the warranty? Your probe is covered by a 12-month warranty against defects.
Need more details? Download the full datasheet for complete specs and diagrams.