Bently Nevada 3300 XL 8mm ETR Probe: Standard Length Precision Monitoring

The 330192-00-10-10-00 provides reliable vibration measurement with a balanced 1.0-inch case and 1.0-meter cable configuration. This Bently Nevada probe delivers consistent performance for general industrial applications requiring dependable machinery monitoring.

Product Overview & Specifications

• Manufacturer: Bently Nevada, Trusted Monitoring Solutions
• Product Series: 3300 XL Vibration Monitoring System
• Complete Model: 330192-00-10-10-00
• Measurement Principle: 8mm Eddy Current Transducer
• Quality Origin: Precision Manufactured in U.S.A.

Electrical Characteristics & Performance

• DC Resistance Value: 7.59 Ω ± 0.50 Ω at 25°C ambient
• Frequency Response: 0.5 Hz to 10,000 Hz operating range
• Displacement Range: 0 to 90 mils (0 to 2.3 mm) measurement
• System Sensitivity: 200 mV/mil with ±2% total accuracy
• Linearity Performance: Better than ±1.2% of full scale
• Signal Resolution: 0.1 mils (2.54 microns) minimum detection

Physical Configuration & Dimensions

• Case Length: Standard 1.0 inch stainless steel housing
• Cable Length: Balanced 1.0 meter (3.3 feet) reach
• Thread Specification: 3/8-24 UNF with armored protection
• Maximum Engagement: 0.563 inches thread installation depth
• Clearance Required: 0.8 inches minimum operational space

Environmental Specifications

• Operating Temperature: -52°C to +177°C standard range
• Extended Capability: Probe tip withstands +218°C maximum
• Cable Temperature: Rated to +260°C continuous operation
• Low Temperature Limit: Critical -34°C minimum operating point
• Humidity Endurance: Less than 3% ASF change at 93% RH
• Vibration Resistance: 15g operational vibration tolerance

Material Construction & Components

• Probe Tip: Durable Polyphenylene sulfide (PPS) material
• Case Material: AISI 303/304 stainless steel construction
• Sealing System: Viton® O-ring for pressure differential
• Cable Design: Double-shielded industrial cable
• Armor Protection: Stainless steel braided armor cover

Performance Specifications

• Response Time: Less than 1 millisecond for rapid detection
• Output Impedance: 50 ohms nominal at operating frequency
• Phase Response: Linear phase within ±2 degrees
• Temperature Coefficient: 0.02% per °C typical variation
• Long-term Stability: Less than 1% drift per year

Installation Guidelines & Requirements

• Follow maximum thread engagement specifications precisely
• Maintain proper clearance between probe tip and target surface
• Use appropriate anti-rotation hardware during installation
• Ensure cable has adequate strain relief and proper routing
• Verify system grounding meets industrial standards

Shipping & Delivery Options

• FedEx International Priority for urgent global deliveries
• UPS Worldwide Express for reliable international shipping
• DHL Express for fastest delivery to most destinations
• Complete tracking and insurance on all shipments
• Standard ground shipping available for domestic orders

Package Contents & Accessories

• One 3300 XL 8mm ETR probe with 1.0 meter integrated cable
• Comprehensive installation and operation manual
• Protective end caps for probe tip and connector
• Technical data sheet with complete specifications

Warranty & Customer Support

• Complete 12-month warranty against manufacturing defects
• Full coverage for materials, workmanship, and performance
• Expert technical support for installation guidance
• Rapid replacement service for qualified warranty claims

Technical Frequently Asked Questions

• What is the recommended target material for optimal performance?
• Carbon steel AISI 4140 provides the best measurement results and signal strength
• How often should I calibrate this vibration probe?
• We recommend annual calibration for critical applications and biennial for standard use
• Can this probe measure both vibration and position simultaneously?
• Yes, the probe provides both dynamic vibration and static position measurements
• What is the typical service life in continuous operation?
• With proper installation, expect 3-5 years of reliable service in typical conditions
• Does the probe require special handling during installation?
• Avoid sharp bends in the cable and protect the probe tip from physical damage

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Phone: +86 180 3000 5825