330192-00-10-20-00 Bently Nevada | Armored Vibration Sensor
UBEST – Pemasok Suku Cadang Otomasi Global Terpercaya
Kami menawarkan berbagai suku cadang otomasi industri yang tersedia di stok. Semua produk dilengkapi dengan garansi 12 bulan dan pengembalian dana 30 hari untuk masalah kualitas.
Bently Nevada 330192-00-10-20-00 Vibration Monitoring Probe
Ensure optimal machinery protection with the Bently Nevada 330192-00-10-20-00 vibration probe. This industrial-grade sensor delivers precise measurements for critical equipment. The 330192-00-10-20-00 offers extended reach with its 2-meter armored cable.
- Extended Cable Length: 2.0 meters for flexible installation
- Rugged Construction: Stainless steel body with armor protection
- Wide Temperature Operation: Performs from -52°C to +177°C
- Hazardous Area Ready: Certified for explosive environments
Technical Specifications
Product Model: Bently Nevada 330192-00-10-20-00
Probe Series: 3300 XL Vibration Monitoring System
Sensor Type: 8mm ETR Proximity Probe
Thread Specification: 3/8-24 UNF
Case Dimension: 1.0 inch length
Cable Length: 2.0 meters (6.6 feet)
Electrical Resistance: 7.88 ± 0.50 Ω
Tip Construction: Polyphenylene Sulfide (PPS)
Housing Material: AISI 303/304 Stainless Steel
Standard Temperature: -52°C to +177°C
High Temperature: Up to +218°C capability
Sealing System: Viton O-ring pressure seal
Thread Engagement: 0.563 inch maximum
Environmental Rating: IP67 equivalent
Humidity Performance: <3% ASF change at 93% RH
Safety Certifications: ATEX, IECEx compliant
Vibration Limit: 15g peak operating
Shock Resistance: 50g peak survival
Warranty & Shipping
This product is covered by a comprehensive 12-month warranty. We ship internationally using FedEx, UPS, and DHL for reliable delivery.
Frequently Asked Questions
What is the main advantage of the 2-meter cable?
It provides greater installation flexibility for hard-to-reach machinery locations.
How does this probe handle wet conditions?
The Viton O-ring seal and armored cable provide excellent moisture protection.
What tools are needed for installation?
Basic wrench for the 3/8-24 UNF thread and gap setting tools for calibration.
Can multiple probes be used on one machine?
Yes, typically X, Y and thrust position probes are installed for complete monitoring.
How often should calibration be performed?
Annual calibration is recommended for critical machinery protection systems.
© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825