70085-1010-078 AI-TEK Speed Sensor - Compact Magnetic Pickup
UBEST – Pemasok Suku Cadang Otomasi Global Terpercaya
Kami menawarkan berbagai suku cadang otomasi industri yang tersedia di stok. Semua produk dilengkapi dengan garansi 12 bulan dan pengembalian dana 30 hari untuk masalah kualitas.
AI-TEK 70085-1010-078 Speed Sensor - Compact RPM Detection
Meet the AI-TEK 70085-1010-078 sensor - your compact solution for reliable speed monitoring. This versatile sensor provides accurate measurements in limited spaces.
Main Advantages
- Compact design - Fits tight installations
- Wire termination - Easy direct connection
- Wide temperature range - From -55°C to +107°C
- Standard thread size - 5/8-18 easy mounting
- Reliable output - 40V P-P standard voltage
Complete Specifications
- Manufacturer: AI-TEK
- Part Number: 70085-1010-078
- Product Type: Magnetic Speed Sensor
- Standard Output: 40V P-P minimum
- Guaranteed Output: 3.4V P-P at test point
- DC Resistance: 130 ohms maximum
- Inductance Value: 33 mH typical
- Output Polarity: White wire positive
- Thread Specification: 5/8-18 UNF
- Thread Dimensions: 1.812 inches length
- Sensor Size: 1.812 inches total
- Cable Length: 12 inches (30.5 cm)
- Weight Specification: 3 ounces maximum
- Termination Style: Wire leads
- Frequency Response: 0-15,000 Hz
- Insulation Class: Class B standard
- Vibration Tolerance: 15G, 10-2000 Hz
- Shock Survival: 50G, 11ms duration
Easy Installation Steps
Screw into 5/8-18 threaded hole. Position with correct air gap. Connect wire leads. Check rotation direction. Verify signal quality.
Perfect Applications
- Small engine speed sensing
- Compact gearbox monitoring
- Motor RPM measurement
- Pump speed detection
- Light machinery control
Shipping Services
Global delivery via FedEx, UPS, DHL. Quick order processing. Online tracking available.
What You Receive
- AI-TEK 70085-1010-078 Speed Sensor
- Technical documentation
- Installation guidance
Quality Promise
12-month warranty coverage starts from delivery date. We guarantee product reliability.
Expert Questions & Answers
What is the optimal installation gap?
Maintain 0.020 to 0.040 inches between sensor tip and gear teeth for best signal performance.
Can I extend the wire leads?
Yes, use shielded cable for extensions and maintain proper grounding to prevent signal noise.
How do I identify the correct wiring?
The white wire is positive output, while the other lead connects to ground or negative.
What minimum speed can it detect?
It can detect very low speeds, typically down to 10 RPM with proper gear tooth configuration.
Is this sensor waterproof rated?
While sealed against moisture, it's not fully waterproof - avoid direct water immersion.
© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com | +86 180 3000 5825