Bently Nevada 3300 Series Ceramic Proximity Probe for Industrial Monitoring

The 146054-036-50-02-05 represents Bently Nevada's premium 3300 series ceramic proximity probe. This new unit comes in original factory packaging with full manufacturer warranty. The probe delivers exceptional vibration and position monitoring for industrial machinery.

Complete Model Number Breakdown

• 146054: 3300 Series ceramic capped probe without armor
• -036: 3.6-inch overall case length configuration
• -50: 5.0-meter cable length (16.4 feet)
• -02: Miniature coaxial ClickLoc connector type
• -05: Certified for CSA, ATEX, and IECEx standards

Technical Specifications

• Brand: Bently Nevada
• Model Series: 3300 XL Proximity Transducer System
• Linear Measurement Range: 1.52 mm (60 mils) from 0.25 to 1.78 mm
• Voltage Output: Approximately -4 to -16 Vdc across linear range
• Sensitivity: 7.87 V/mm ±6.5% (200 mV/mil)
• Temperature Operating Range: -51°C to +177°C (-60°F to +351°F)
• Pressure Rating: 34 Bar (500 psi) nitrogen sealing capability
• Thread Specification: 3/8-24 UNF thread with 0.563" maximum engagement
• Electrical Resistance: 8.73 ± 0.70 ohms for 5.0-meter version

Construction and Materials

• Probe Tip: Durable alumina ceramic (Al₂O₃) construction
• Case Material: High-grade AISI 304 stainless steel
• Cable Type: 75 Ω coaxial with FEP insulation
• Connector System: Miniature coaxial ClickLoc for secure connection

Installation Guidelines

• Use only with compatible 5-meter Proximitor sensors
• Maintain 0.25 mm (10 mils) minimum target distance
• Ensure proper thread engagement without exceeding maximum
• Verify target material is AISI 4140 steel for specified accuracy
• Follow agency approval guidelines for hazardous locations

Packaging and Shipping

• Factory original packaging with protective materials
• Available shipping via FedEx, UPS, or DHL express services
• Standard commercial documentation included
• Quick dispatch from warehouse stock

Frequently Asked Questions

• What is the compatible sensor for this probe?
• The 146054-036-50-02-05 requires a 5-meter Proximitor sensor for proper operation.
• Can this probe handle high-pressure environments?
• Yes, it seals 34 Bar (500 psi) nitrogen with options for higher pressures.
• What temperature ranges can this probe withstand?
• It operates reliably from -51°C to +177°C in most industrial settings.
• Is this probe certified for hazardous locations?
• Yes, it carries CSA, ATEX, and IECEx certifications for safe operation.
• What target material provides specified accuracy?
• All specifications assume AISI 4140 steel target material for measurement.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Phone: +86 180 3000 5825