Siemens 6FX8002-2DC10-1BD0: Factory-Built DRIVE-CLiQ Motor Connection Cable

Get a reliable, ready-to-install link for your drive system. The Siemens 6FX8002-2DC10-1BD0 is a pre-assembled signal cable. It ensures perfect communication between SINAMICS S120 drives and motors, right out of the box.

Simple Plug & Play Setup

• Take the cable out of its protective packaging.
• Connect the RJ45 plug (IP20) to the drive module in your control cabinet.
• Route the cable neatly to your motor.
• Plug the robust IP67 connector into the motor's feedback port.
• Power on and start up your system with confidence.

Full Product Specifications

Siemens Article Number: 6FX8002-2DC10-1BD0
Product Family: MOTION-CONNECT 800PLUS DRIVE-CLiQ Cables.
Connector 1 (Drive Side): Standard RJ45, IP20 protection rating.
Connector 2 (Motor Side): 24V plug with high IP67 rating (dustproof and waterproof).
Key Feature: Pre-assembled and tested at the factory for guaranteed performance.
Maximum Certified Length: For stable signals up to 75 meters.
Cable Diameter: Slim 7.1 mm outer diameter for easy installation in cable tracks.
Length Code: Manufacturing tolerance indicated by +0/+10/+3/+0.
Net Weight: Lightweight at approximately 0.913 kilograms.
Primary Use: Connects SINAMICS S120 Motor Modules to motors or remote encoders.
Signal Type: Carries high-speed DRIVE-CLiQ digital feedback and control data.
Shielding: High-grade shielding for excellent noise immunity in industrial environments.

Professional FAQs Answered

What is the main advantage of a pre-assembled cable?
It eliminates field termination errors, ensures perfect connector mating, and guarantees signal integrity. This reduces machine startup problems and downtime.

Can I use this cable in an outdoor application?
The motor-side IP67 connector is suitable for wet or dusty conditions. However, the entire cable run and the IP20 cabinet end must be protected from direct weather exposure.

Is the cable length flexible, or is it a fixed size?
You must select the required length when ordering. This specific part number references a standard length with manufacturing tolerances; exact cut lengths are separate order codes.

Why is there a specific maximum length of 75m?
DRIVE-CLiQ is a high-speed serial protocol. Beyond 75m, signal degradation can occur, leading to communication faults and potential drive trips. Always adhere to this limit.

Do I need special tools to install it?
No special crimping tools are needed. You only require standard tools for mounting cable clamps and strain relief glands at the IP67 connector housing.

Your Purchase Protection

This genuine Siemens cable is covered by a full 12-month warranty. We deliver globally using express services: FedEx, UPS, and DHL for fast arrival.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Phone: +86 180 3000 5825