Bently Nevada 330904-08-10-70-01-00 | 3300 NSv Long-Length Proximity Probe

Get complete technical details and installation instructions for your 3300 NSv system.
Download the Full 3300 XL NSv Proximity Transducer System Datasheet Here

Part Number Breakdown: 330904-08-10-70-01-00

• Manufacturer: Bently Nevada

• Base Model: 330904 = 3300 NSv Probe, M8x1 thread, armored

• Unthreaded Section: -08 = 80 mm length

• Case Dimensions: -10 = 100 mm overall length

• Cable Length: -70 = 7.0 meters (23.0 feet)

• Connection System: -01 = Miniature ClickLoc connector with protector

• Certification: -00 = No agency approval required

Performance Specifications

• Linear Measurement Range: 1.5 mm (60 mils)

• Optimal Gap Setting: 1.0 mm (40 mils) from target

• Sensitivity Rating: 7.87 V/mm (200 mV/mil)

• Linearity Accuracy: ±0.06 mm (±2.3 mils) deviation

• Frequency Response: 0 to 10 kHz (±3 dB)

• Electrical Resistance: 5.9 Ω ± 0.9 Ω (7m cable)

• Temperature Range: -52°C to +177°C operation

• Minimum Target: 8.9 mm diameter (flat surface)

• Probe Material: Polyphenylene Sulfide (PPS) tip

• Construction: AISI 304 Stainless Steel case

Installation Guidelines

• Hand-tighten only during installation - no tools required

• Apply maximum 5.1 N·m torque for connector connections

• Allow maximum 12 mm thread engagement for M8x1 fitting

• Maintain minimum 25.4 mm bend radius for cable protection

• Use shielded triad cable for best signal quality

• Maximum 305 meters field wiring distance supported

Package Contents

• One 3300 NSv proximity probe unit

• Miniature coaxial ClickLoc connector assembly

• Protective connector cover

• Original factory packaging with documentation

Shipping & Delivery

• Worldwide shipping via FedEx, UPS, and DHL

• Genuine factory-new condition guaranteed

• Standard processing and transit times apply

Common Questions

• Q: Does this 3300 NSv model work with existing 3300 RAM systems?
  A: Yes, it provides full mechanical and electrical compatibility.

• Q: What is the maximum temperature for this probe?
  A: It operates reliably from -52°C to +177°C.

• Q: How should I set the probe gap for best results?
  A: Maintain 1.0 mm gap from target for optimal performance.

• Q: What target size works best with this probe?
  A: Use at least 13 mm diameter targets for accurate measurements.