{"product_id":"1440-vse02-01ra-allen-bradley-vibration-module-request-a-quote","title":"1440-VSE02-01RA Allen-Bradley Vibration Module – Request a Quote","description":"\u003ch2\u003e\u003cstrong\u003eAllen-Bradley 1440-VSE02-01RA XM Vibration Module – 2 Channel DeviceNet Monitor\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e1440-VSE02-01RA\u003c\/strong\u003e is a vibration monitoring module from the Allen-Bradley XM series. It reads two sensor channels and sends data over DeviceNet at a fixed 19,200 bps rate. Maintenance teams use this module to watch low-frequency machine vibration in real time. The \u003cstrong\u003e1440-VSE02-01RA\u003c\/strong\u003e mounts on a terminal base and reports status through seven LED indicators.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eSummary\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eThe \u003cstrong\u003e1440-VSE02-01RA\u003c\/strong\u003e comes from the Allen-Bradley XM vibration product line.\u003c\/li\u003e\n\u003cli\u003eTwo input channels accept vibration sensor signals for continuous machine monitoring.\u003c\/li\u003e\n\u003cli\u003eDeviceNet communication links the module to existing control networks.\u003c\/li\u003e\n\u003cli\u003eSeven red and green LEDs show channel and network status at a glance.\u003c\/li\u003e\n\u003cli\u003eTwo isolated outputs keep signal paths clean in noisy plant environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eCore Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Allen-Bradley (Rockwell Automation)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e1440-VSE02-01RA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e XM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Vibration module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput channels:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication:\u003c\/strong\u003e DeviceNet protocol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaud rate:\u003c\/strong\u003e 19,200 bps, fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e 24 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSampling mode:\u003c\/strong\u003e Synchronous or asynchronous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e \u003cspan style=\"color:#c0392b;\"\u003e\u003cstrong\u003e1 Hz to 20 Hz\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e greater than 100 kOhm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolated outputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus display:\u003c\/strong\u003e seven red and green LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e terminal base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 781180000171\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN:\u003c\/strong\u003e 10781180000178\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.34 kg (0.75 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003ePower and Thermal Data\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eTypical current draw reaches 175 mA, and peak draw reaches 300 mA.\u003c\/li\u003e\n\u003cli\u003eNormal heat output sits near 4 W, with a 7 W ceiling under full load.\u003c\/li\u003e\n\u003cli\u003eLow heat generation helps keep cabinet temperatures stable.\u003c\/li\u003e\n\u003cli\u003eEfficient power use supports dense panel layouts without extra cooling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eKey Selling Points\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eDual channels let one module monitor two measurement points at once.\u003c\/li\u003e\n\u003cli\u003eDeviceNet support cuts wiring cost by sharing one network cable.\u003c\/li\u003e\n\u003cli\u003eThe fixed baud rate keeps data traffic predictable and easy to validate.\u003c\/li\u003e\n\u003cli\u003eIsolated outputs block ground loops that often distort vibration signals.\u003c\/li\u003e\n\u003cli\u003eHigh input impedance above 100 kOhm accepts many sensor types.\u003c\/li\u003e\n\u003cli\u003eThe terminal base design speeds swap-out during planned maintenance.\u003c\/li\u003e\n\u003cli\u003eSeven LEDs shorten fault finding to a single glance at the front panel.\u003c\/li\u003e\n\u003cli\u003eSynchronous sampling captures phase data for balance and alignment work.\u003c\/li\u003e\n\u003cli\u003eAsynchronous sampling suits simple trend monitoring on slow machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eInstallation Guide\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eSnap the module onto a compatible XM terminal base before wiring.\u003c\/li\u003e\n\u003cli\u003eFeed 24 V DC supply power and confirm polarity at the terminals.\u003c\/li\u003e\n\u003cli\u003eConnect sensor cables to both input channels and check shield grounding.\u003c\/li\u003e\n\u003cli\u003eSet the DeviceNet node address to a free value on the network.\u003c\/li\u003e\n\u003cli\u003eKeep the fixed 19,200 bps rate in mind when planning bus length.\u003c\/li\u003e\n\u003cli\u003eRoute sensor leads away from drive cables to reduce noise pickup.\u003c\/li\u003e\n\u003cli\u003eVerify LED patterns after power-up and confirm normal status.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e1 × \u003cstrong\u003e1440-VSE02-01RA\u003c\/strong\u003e vibration module\u003c\/li\u003e\n\u003cli\u003e1 × installation reference sheet\u003c\/li\u003e\n\u003cli\u003e1 × terminal base connection guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eWarranty and Shipping\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eEvery unit carries a 12-month warranty against manufacturing defects.\u003c\/li\u003e\n\u003cli\u003eFedEx, UPS, and DHL deliver orders to most global destinations.\u003c\/li\u003e\n\u003cli\u003eTracking details arrive by email after the carrier collects the parcel.\u003c\/li\u003e\n\u003cli\u003eStock availability and lead times appear on the product page.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What sensor types pair with the 1440-VSE02-01RA?\u003c\/strong\u003e\u003cbr\u003eA: It accepts standard vibration sensors whose output fits the input range and impedance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Why does the module use a fixed baud rate?\u003c\/strong\u003e\u003cbr\u003eA: A fixed 19,200 bps rate keeps DeviceNet traffic stable and simple to troubleshoot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I run both channels in different sampling modes?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The module supports synchronous and asynchronous sampling across its two channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How do I read module status without software?\u003c\/strong\u003e\u003cbr\u003eA: The seven red and green LEDs show channel health and network state directly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What supply current should I plan for?\u003c\/strong\u003e\u003cbr\u003eA: Allow 300 mA at peak load and 175 mA for typical operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e© 2026 Ubest Automation Limited. \u003ca href=\"https:\/\/www.ubestplc.com\/\"\u003ehttps:\/\/www.ubestplc.com\/\u003c\/a\u003e All rights reserved.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eContact: \u003ca href=\"mailto:sales@ubestplc.com\"\u003esales@ubestplc.com\u003c\/a\u003e | \u003ca href=\"https:\/\/wa.me\/868618030005825\"\u003e+86 86 180 3000 5825\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":53283299066138,"sku":"1440-VSE02-01RA","price":257.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0873\/6240\/4634\/files\/1440-VSE02-01RA.jpg?v=1792660723","url":"https:\/\/www.ubestplc.com\/products\/1440-vse02-01ra-allen-bradley-vibration-module-request-a-quote","provider":"Ubest Automation Limited","version":"1.0","type":"link"}