Bently Nevada 3300 XL 8 mm Armored Proximity Probe with 5m Cable

Detailed Technical Specifications

• Brand & Model: Bently Nevada 3300 XL 8 mm Proximity Probe.
• Full Part Number Suffix:
  • 330104: 3300 XL 8mm Probe, M10x1 thread, with armor.
  • 00: Unthreaded Length = 50 mm.
  • 03: Overall Case Length = 100 mm.
  • 50: Total Cable Length = 5.0 meters (16.4 feet).
  • 02: Miniature coaxial ClickLoc connector, standard cable.
  • 05: Agency Approvals = CSA, ATEX, IECEx.
• Important Note: This 5-meter probe must be used with a 5-meter Proximitor sensor only.
• Linear Measurement Range: 2 mm (80 mils), effective from 0.25 mm to 2.3 mm from the target.
• Standard Gap Setting: Set to -9 Vdc, approximately 1.27 mm (50 mils), for radial vibration measurement.
• Nominal DC Resistance (RPROBE): 8.73 Ω ± 0.50 for the 5.0m cable version.
• Temperature Range: Standard operation from -52°C to +177°C (-62°F to +350°F).

Ruggedized Construction Features

• Probe Tip Material: Engineered Polyphenylene Sulfide (PPS).
• Probe Case Material: Robust AISI 303/304 Stainless Steel with armored protection.
• Sealing Design: Incorporates a Viton® O-ring to seal the probe tip from the case.
• Mounting: Standard M10 x 1 mounting thread with 15 mm maximum engagement.
• Humidity Resistance: Performance stable within 3% at 93% humidity (IEC 68-2-3).

Frequently Asked Questions (FAQ)

• Q: What is special about part number 330104-00-03-50-02-05?
  A: It combines armored construction, a 50mm unthreaded section, a 5m cable, and full hazardous area approvals.
• Q: Can I use this 3300 XL 8 mm Probes with a standard 1m Proximitor?
  A: No. This 5m-cable probe requires a matching 5-meter Proximitor sensor for proper system operation.
• Q: What applications benefit from the armored version?
  A: The armor provides extra mechanical protection in high-vibration environments or where physical damage is a concern.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com Phone: +86 86 180 3000 5825