{"product_id":"3300-xl-proximity-probe-bently-nevada-330104-00-18-10-01-05","title":"3300 XL Proximity Probe | Bently Nevada 330104-00-18-10-01-05","description":"\u003ch2\u003ePrecision measurement with Bently Nevada 330104-00-18-10-01-05\u003c\/h2\u003e\n\u003ch3\u003eFull suffix breakdown - 330104-00-18-10-01-05\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330104\u003c\/strong\u003e – 3300 XL 8 mm probe, M10 x 1 thread, with armor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00\u003c\/strong\u003e – Unthreaded length: 00 mm (standard).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18\u003c\/strong\u003e – Overall case length: 180 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10\u003c\/strong\u003e – Total length: 1.0 meter (3.3 feet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e01\u003c\/strong\u003e – Miniature coaxial ClickLoc connector with connector protector, standard cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e05\u003c\/strong\u003e – Approvals: CSA, ATEX, IECEx.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ manufacturer:\u003c\/strong\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e330104-00-18-10-01-05\u003c\/strong\u003e (3300 XL 8 mm series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurement range:\u003c\/strong\u003e 2 mm (80 mils) linear from 0.25 mm to 2.3 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput characteristic:\u003c\/strong\u003e -1 to -17 Vdc, recommended gap -9 Vdc (approx. 1.27 mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC resistance (probe):\u003c\/strong\u003e 7.59 Ω ±0.50 (1.0 m length).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e supports field wiring up to 305 m (1000 ft); see roll-off graphs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e standard probe -52 °C to +177 °C (-62 °F to +350 °F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended cable temp:\u003c\/strong\u003e cable\/connector withstand -51 °C to +260 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure seal:\u003c\/strong\u003e Viton O-ring; differential seal design (not factory tested).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity resistance:\u003c\/strong\u003e less than 3% ASF change after 56 days, 93% RH (IEC 68-2-3).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterials and mechanical details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe tip:\u003c\/strong\u003e Polyphenylene sulfide (PPS) – high durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe case:\u003c\/strong\u003e AISI 303 or 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread size:\u003c\/strong\u003e M10 x 1, max engagement 15 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 323 g per meter (11.4 oz per meter).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch3\u003eWhat is the linear range of this 3300 XL 8 mm probe?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e330104-00-18-10-01-05\u003c\/strong\u003e offers a 2 mm linear range, starting at 0.25 mm from the target and extending to 2.3 mm. This corresponds to approximately -1 to -17 Vdc output.\u003c\/p\u003e\n\u003ch3\u003eCan I use this probe with existing 3300 XL monitor systems?\u003c\/h3\u003e\n\u003cp\u003eYes, the \u003cstrong\u003e3300 XL 8 mm Proximity Probes\u003c\/strong\u003e series is fully compatible with Bently Nevada 3300 XL Proximitor sensors and monitoring systems. Ubest Automation recommends verifying the total cable length does not exceed 305 meters.\u003c\/p\u003e\n\u003ch3\u003eWhat temperature range does the probe cable handle?\u003c\/h3\u003e\n\u003cp\u003eThe probe tip operates from -52 °C to +177 °C. The cable and connector extend to -51 °C to +260 °C for the extended temperature range version.\u003c\/p\u003e\n\u003ch3\u003eDoes the probe include any hazardous location certifications?\u003c\/h3\u003e\n\u003cp\u003eYes, suffix code 05 provides CSA, ATEX, and IECEx approvals for use in Zone 0, Zone 2, and Division 2 locations. Refer to the approval section for full entity parameters.\u003c\/p\u003e\n\u003ch3\u003eWhat is the recommended gap setting for vibration measurement?\u003c\/h3\u003e\n\u003cp\u003eSet the gap to -9 Vdc, which corresponds to approximately 1.27 mm (50 mils) from the target surface. This places the probe in the center of its linear range.\u003c\/p\u003e\n\u003ch3\u003eHow is this probe shipped?\u003c\/h3\u003e\n\u003cp\u003eUbest Automation ships all orders via FedEx, UPS, or DHL. The \u003cstrong\u003e330104-00-18-10-01-05\u003c\/strong\u003e is packaged in anti-static protective material to ensure safe transit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e© 2026 Ubest Automation Limited. \u003ca href=\"https:\/\/www.ubestplc.com\/\"\u003ehttps:\/\/www.ubestplc.com\/\u003c\/a\u003e All rights reserved.\u003c\/strong\u003e\u003cbr\u003eContact: \u003ca href=\"mailto:sales@ubestplc.com\"\u003esales@ubestplc.com\u003c\/a\u003e Phone: \u003ca href=\"https:\/\/wa.me\/8618030005825\"\u003e+86 180 3000 5825\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51769765167386,"sku":"330104-00-18-10-01-05","price":256.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0873\/6240\/4634\/files\/330104-00-18-10-01-05.jpg?v=1772245496","url":"https:\/\/www.ubestplc.com\/products\/3300-xl-proximity-probe-bently-nevada-330104-00-18-10-01-05","provider":"Ubest Automation Limited","version":"1.0","type":"link"}