{"product_id":"330101-38-49-20-02-05-bently-nevada-3300-xl-8-mm-probe-atex","title":"330101-38-49-20-02-05 | Bently Nevada 3300 XL 8 mm Probe ATEX","description":"\u003ch2\u003e\u003cstrong\u003eBently Nevada 3300 XL 8 mm Probe – Hazardous Area Approved\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Technical Specifications – Bently Nevada 3300 XL 8 mm System\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e \u003cstrong\u003e330101-38-49-20-02-05\u003c\/strong\u003e – 3300 XL 8 mm Probe, 3\/8-24 UNF thread, without armor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approvals:\u003c\/strong\u003e CSA, ATEX, IECEx (Option 05) for hazardous area installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 2 mm (80 mils) from 0.25 mm to 2.3 mm (10 to 90 mils). Output spans approximately –1 to –17 Vdc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor (ISF):\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil) ±5% for 1 or 5 m systems, including interchangeability error (0°C to +45°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeviation from Best Fit Straight Line (DSL):\u003c\/strong\u003e less than ±0.025 mm (±1 mil) for standard 1 or 5 meter systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance (RPROBE):\u003c\/strong\u003e 7.88 ± 0.50 Ω for 2.0 meter length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Cable Capacitance:\u003c\/strong\u003e 69.9 pF\/m (21.3 pF\/ft) typical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Gap (Radial Vibration):\u003c\/strong\u003e -9 Vdc corresponds to approximately 1.27 mm (50 mils).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Wiring:\u003c\/strong\u003e 0.2 to 1.5 mm² (16 to 24 AWG) shielded triad cable, maximum length 305 meters (1000 feet) to Proximitor Sensor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eComplete Suffix Information – Model 330101-38-49-20-02-05\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Model:\u003c\/strong\u003e 330101 — 3300 XL 8 mm Probe, 3\/8-24 UNF thread, without armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded Length Option (38):\u003c\/strong\u003e 3.8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Case Length Option (49):\u003c\/strong\u003e 4.9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length Option (20):\u003c\/strong\u003e 2.0 meters (6.6 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector \u0026amp; Cable-Type Option (02):\u003c\/strong\u003e Miniature coaxial ClickLoc™ connector, standard cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval Option (05):\u003c\/strong\u003e CSA, ATEX, IECEx Approvals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eHazardous Area Certifications – CSA, ATEX, IECEx\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCSA Certification:\u003c\/strong\u003e Suitable for Class I, Division 1, Groups A, B, C, D hazardous locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eATEX Certification:\u003c\/strong\u003e Compliant with European directive for explosive atmospheres.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIECEx Certification:\u003c\/strong\u003e International standard for equipment in explosive environments.\u003c\/li\u003e\n\u003cli\u003eProbe meets EPL Ga, Gc, and Dc requirements per temperature classification tables.\u003c\/li\u003e\n\u003cli\u003eVerify probe selection matches specific zone and gas group requirements for your site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eEnvironmental \u0026amp; Mechanical Robustness\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS) with TipLoc molding for stronger bond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 303 or 304 stainless steel (SST).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Probe Temperature Range:\u003c\/strong\u003e Operating and storage from -52°C to +177°C (-62°F to +350°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Temperature Range Option:\u003c\/strong\u003e Probe tip up to +218°C (+425°F); cable up to +260°C (+500°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Sealing:\u003c\/strong\u003e Viton® O-ring seals differential pressure between probe tip and case.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative Humidity Performance:\u003c\/strong\u003e Less than 3% change in Average Scale Factor after 56 days at 93% humidity (IEC 68-2-3).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Engagement:\u003c\/strong\u003e 3\/8-24 UNF, maximum thread engagement length 0.563 inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Torque:\u003c\/strong\u003e Recommended 11.2 N•m (100 in•lbf) for forward mounted probes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Pull Strength:\u003c\/strong\u003e CableLoc design provides 330 N (75 lbf) secure attachment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluidLoc Option Available:\u003c\/strong\u003e Prevents oil or liquid leakage through cable interior.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What approvals does this 3300 XL 8 mm probe carry?\u003c\/strong\u003e\u003cbr\u003eA: Model \u003cstrong\u003e330101-38-49-20-02-05\u003c\/strong\u003e includes CSA, ATEX, and IECEx certifications (Option 05) for hazardous areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I use this probe with a 9-meter extension system?\u003c\/strong\u003e\u003cbr\u003eA: Yes, the probe works with standard extension cables; scale factor tolerance becomes ±6.5% for 9-meter total systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does the probe resist oil or chemical ingress?\u003c\/strong\u003e\u003cbr\u003eA: The standard Viton O-ring provides pressure sealing. Order the FluidLoc cable option for additional liquid protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the maximum probe temperature for continuous operation?\u003c\/strong\u003e\u003cbr\u003eA: Standard probe withstands +177°C (+350°F); extended temperature probe tip supports up to +218°C (+425°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is this probe compatible with existing 3300 XL monitoring systems?\u003c\/strong\u003e\u003cbr\u003eA: Absolutely. This model matches 3300 XL 8 mm Proximity Proximitor sensors and 3300 monitoring systems seamlessly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How do I verify the probe DC resistance?\u003c\/strong\u003e\u003cbr\u003eA: Use a multimeter across center and outer conductor; nominal RPROBE for 2.0 m length equals 7.88 ±0.50 Ω.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe \u003cstrong\u003e3300 XL 8 mm Proximity Probes\u003c\/strong\u003e offer unmatched durability and certified safety for turbines, compressors, and generators in hazardous locations. Choose \u003cstrong\u003eBently Nevada 3300 XL 8 mm Probe\u003c\/strong\u003e with CSA, ATEX, IECEx approvals for your critical machinery protection. For the full catalog, visit \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.ubestplc.com\/collections\/bently-nevada-3300-xl-8-mm-proximity-probes\" target=\"_blank\"\u003eUbest PLC’s 3300 XL 8 mm series\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e© 2026 Ubest Automation Limited. \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.ubestplc.com\/\" target=\"_blank\"\u003ehttps:\/\/www.ubestplc.com\/\u003c\/a\u003e All rights reserved.\u003c\/strong\u003e\u003cbr\u003eContact: \u003ca href=\"mailto:sales@ubestplc.com\"\u003esales@ubestplc.com\u003c\/a\u003e | Phone: \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/wa.me\/8618030005825?text=Inquiry%20about%20Bently%20Nevada%20330101-38-49-20-02-05\" target=\"_blank\"\u003e+86 180 3000 5825 (WhatsApp)\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51879899857178,"sku":"330101-38-49-20-02-05","price":215.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0873\/6240\/4634\/files\/330101-38-49-20-02-05.jpg?v=1774839142","url":"https:\/\/www.ubestplc.com\/products\/330101-38-49-20-02-05-bently-nevada-3300-xl-8-mm-probe-atex","provider":"Ubest Automation Limited","version":"1.0","type":"link"}