Bently Nevada 330103-00-21-05-11-05 | 3300 XL 8 mm Proximity Probe

Brand & Model Identification

• Manufacturer: Bently Nevada (Baker Hughes Digital Solutions)
• Product Model: 330103-00-21-05-11-05 – 3300 XL 8 mm Proximity Probe, Metric, M10 x 1 thread, without armor
• Product Series: 3300 XL 8 mm Proximity Probes

Complete Suffix Configuration (Tree Structure)

• 330103 = 3300 XL 8 mm Probe, M10 x 1 thread, without armor
• 00 = Minimum unthreaded length: 0 mm
• 21 = Overall case length: 210 mm
• 05 = Total length: 0.5 meter (1.6 feet)
• 11 = Connector: Miniature coaxial ClickLoc with connector protector, FluidLoc cable
• 05 = Agency approvals: CSA, ATEX, IECEx

Measurement & Performance

• Linear range: 2 mm (80 mils) from 0.25 mm to 2.3 mm (10 to 90 mils) target distance.
• Output voltage span: Approximately –1 Vdc to –17 Vdc over linear zone.
• Recommended gap for radial vibration: –9 Vdc (approx. 1.27 mm / 50 mils).
• Nominal DC resistance (RPROBE): 7.45 ± 0.50 Ω for 0.5 m length.
• Frequency response: Supports field wiring up to 305 m (1000 ft) with minimal signal rolloff.

Mechanical & Material Features

• Probe tip material: Polyphenylene sulfide (PPS) for durability and chemical resistance.
• Probe case material: AISI 303 or 304 stainless steel (SST).
• Probe case thread: M10 x 1, maximum thread engagement 15 mm.
• Weight: 323 g/m (11.4 oz per meter).
• Pressure sealing: Viton® O-ring seals differential pressure between tip and case.

Temperature & Environmental Tolerance

• Standard probe operating temperature: –52°C to +177°C (–62°F to +350°F).
• Extended temperature range (tip): –52°C to +218°C (–62°F to +425°F).
• Cable & connector extended rating: –51°C to +260°C (–60°F to +500°F).
• Relative humidity stability: Less than 3% change in Average Scale Factor after 56 days at 93% humidity (IEC 68-2-3).
• Low-temperature caution: Exposure below –34°C (–30°F) may affect pressure seal life.

Electrical & Wiring Compatibility

• Field wiring gauge: 0.2 to 1.5 mm² (16 to 24 AWG). Use 3-conductor shielded triad cable.
• Maximum extension cable length: 305 meters (1,000 feet) between Proximitor Sensor and monitor.
• Connector type: Miniature coaxial ClickLoc with FluidLoc cable and protector.
• Agency certifications: CSA, ATEX, IECEx for hazardous locations (intrinsically safe / non-incendive).

Frequently Asked Questions (FAQ)

What is the linear range of this probe?

• This 3300 XL 8 mm Probe offers a 2 mm (80 mils) linear range starting at 0.25 mm from the target.

Can I use this probe in high-temperature environments?

• Yes. The standard version operates up to 177°C, while the probe tip supports 218°C with extended temperature cable rating.

What type of cable does the probe use?

• It uses a miniature coaxial ClickLoc connector with FluidLoc cable and a protective connector cap.

Is this model suitable for hazardous areas?

• Absolutely. 330103-00-21-05-11-05 carries CSA, ATEX, IECEx approvals for Zone 0, Zone 2, and Class I Div 2 installations.

What is the maximum wiring distance from the sensor to monitor?

• You can run up to 305 meters (1000 feet) of field wiring without significant signal rolloff.

Does the probe require special sealing?

• The integrated Viton® O-ring creates a differential pressure seal. No external sealant is necessary.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825 (WhatsApp)