Bently Nevada 330103-06-15-10-12-05 – 3300 XL 8 mm Proximity Probe

Technical Specifications

• Brand: Bently Nevada
• Model: 330103-06-15-10-12-05 (complete suffix below)
• Type: 3300 XL 8 mm Probe, M10 x 1 thread, without armor
• Probe Tip Material: Polyphenylene sulfide (PPS)
• Probe Case Material: AISI 303 or 304 stainless steel (SST)
• Linear Range: 2 mm (80 mils) from 0.25 mm to 2.3 mm (10 to 90 mils), approx. –1 to –17 Vdc
• Recommended Gap for Radial Vibration: -9 Vdc [approx. 1.27 mm (50 mils)]
• Nominal DC Resistance (1.0m length): 7.59 ± 0.50 Ω
• Field Wiring Length: Max 305 meters (1,000 feet) between sensor and monitor
• Field Wire Gauge: 0.2 to 1.5 mm² (16 to 24 AWG), shielded triad cable recommended
• Operating & Storage Temperature (Standard Probe): -52°C to +177°C (-62°F to +350°F)
• Extended Temperature Tip: -52°C to +218°C (-62°F to +425°F); cable/connector: -51°C to +260°C (-60°F to +500°F)
• Relative Humidity: Less than 3% change in ASF after 56 days at 93% RH (IEC 68-2-3)
• Probe Pressure Seal: Viton® O-ring seals differential pressure
• Approvals (Agency Option 05): CSA, ATEX, IECEx (intrinsically safe for Zone 0/1/2, Class I, Groups A-D)

Complete Suffix Information (Tree Structure)

• 330103 = 3300 XL 8 mm Probe, M10 x 1 thread, without armor
• Unthreaded Length Option: 06 = 60 mm
• Overall Case Length Option: 15 = 150 mm
• Total Length Option: 10 = 1.0 meter (3.3 feet)
• Connector and Cable-Type Option: 12 = Miniature coaxial ClickLoc connector, FluidLoc cable
• Agency Approval Option: 05 = CSA, ATEX, IECEx Approvals

Mechanical & Environmental Highlights

• Probe weight: 323 g/m (11.4 oz per meter)
• Case thread: M10x1 with maximum thread engagement of 15 mm
• Avoid temperatures below -34°C (-30°F) to prevent pressure seal failure
• CSA, ATEX, IECEx approvals for hazardous areas (ia and nA/ec configurations)
• Non-incendive wiring per drawing 140979 for Class I, Division 2, Groups A,B,C,D

Frequently Asked Questions (FAQ)

• Q: Can I use this probe with other proximitor systems?
  A: The 330103-06-15-10-12-05 works only with Bently Nevada 3300 XL Proximitor Sensors.
• Q: What is the maximum cable extension length?
  A: You can extend field wiring up to 305 meters (1000 feet) without significant signal roll-off.
• Q: Is the probe pressure tested before shipment?
  A: No, standard probes do not receive pressure testing. Contact Ubest Automation for custom seal tests.
• Q: Does this probe support ATEX Zone 0?
  A: Yes, approval option 05 includes CSA, ATEX, IECEx for Zone 0 (ia IIC T5…T1 Ga).
• Q: What shipping carriers do you use?
  A: We ship via FedEx, UPS, and DHL worldwide.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825 (WhatsApp)