Bently Nevada 3300 XL 8 mm Proximity Probe – Model 330104-00-11-10-02-05

Complete Suffix Configuration (Order Code Breakdown)

330104-00-11-10-02-05
├─ 330104 : 3300 XL 8 mm Probe, M10 x 1 thread, with armor
├─ Unthreaded Length Option 00 = 00 mm
├─ Overall Case Length Option 11 = 110 mm
├─ Total Length Option 10 = 1.0 meter (3.3 feet)
├─ Connector and Cable-Type Option 02 = Miniature coaxial ClickLoc connector, standard cable
└─ Agency Approval Option 05 = CSA, ATEX, IECEx Approvals

Technical Specifications – Bently Nevada 3300 XL Series

• Brand: Bently Nevada (Baker Hughes) – Manufacturer: Bently Nevada
• Model Number: 330104-00-11-10-02-05 – 3300 XL 8 mm Probe Metric configuration
• Linear Range: 2 mm (80 mils) from 0.25 mm to 2.3 mm (10 to 90 mils) with output -1 to -17 Vdc
• Recommended Gap (Radial Vibration): -9 Vdc approximately 1.27 mm (50 mils)
• Probe Tip Material: Polyphenylene sulfide (PPS) with excellent chemical resistance
• Probe Case Material: AISI 303 or 304 stainless steel (SST) with Viton O-ring pressure seal
• Thread and Engagement: M10 x 1, maximum length of thread engagement 15 mm
• DC Resistance (RPROBE): 7.59 ± 0.50 ohms for 1.0 meter length
• Temperature Range (Standard Probe): -52°C to +177°C (-62°F to +350°F); exposure below -34°C may affect pressure seal life
• Extended Temperature Option: Probe tip up to +218°C; cable and connector up to +260°C
• Relative Humidity: Less than 3% Average Scale Factor change after 56 days at 93% humidity per IEC 68-2-3
• Field Wiring: 0.2 to 1.5 mm² (16 to 24 AWG) shielded triad cable; maximum length 305 meters (1000 feet) between sensor and monitor
• Agency Approvals: CSA, ATEX, IECEx (ia IIC T5…T1 Ga; Class I, Zone 0, and non-incendive nA/ec for Zone 2)

Environmental Robustness and Signal Integrity

• Operating and storage temperature reaches +177°C for standard probes, +218°C for extended tip option
• Pressure seal uses Viton O-ring; probes withstand differential pressure without pre-shipment test (custom test available upon request)
• High humidity tolerance maintains less than 3% scale factor drift after 56-day test
• Coaxial ClickLoc connector provides secure, noise-immune connection for 3300 XL 8 mm probe in vibration monitoring applications
• Field wiring up to 305 meters preserves frequency response; refer to roll-off graphs for high-frequency performance

Frequently Asked Questions (FAQ)

• What is the linear range of Bently Nevada 3300 XL 8 mm probe? The linear measurement range spans 2 mm (80 mils), starting 0.25 mm from target to 2.3 mm.
• Can I use model 330104-00-11-10-02-05 in hazardous areas? Yes, it carries CSA, ATEX, and IECEx approvals for Zone 0 (ia) and Zone 2 (nA/ec) installations.
• What is the maximum operating temperature for standard probe? Standard probes operate from -52°C to +177°C; extended tip version reaches +218°C.
• Does the probe require specific mounting torque? Always follow Bently Nevada installation guide, ensure thread engagement up to 15 mm, and avoid stress on probe tip.
• What is the recommended gap voltage for vibration monitoring? Set to -9 Vdc, approximately 1.27 mm gap, for optimal linear performance.
• How do I connect field wiring properly? Use 0.2 to 1.5 mm² shielded triad cable with total extension up to 305 meters without signal degradation.

Explore the full details of 3300 XL 8 mm Probe series and additional compatible parts at Ubest Automation.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com | Phone/WhatsApp: +86 180 3000 5825