Precision measurement with Bently Nevada 330104-00-20-10-01-05

Full suffix breakdown - 330104-00-20-10-01-05

• 330104 – 3300 XL 8 mm probe, M10 x 1 thread, with armor.
• 00 – Unthreaded length: 00 mm (standard).
• 20 – Overall case length: 200 mm.
• 10 – Total length: 1.0 meter (3.3 feet).
• 01 – Miniature coaxial ClickLoc connector with connector protector, standard cable.
• 05 – Approvals: CSA, ATEX, IECEx.

Key technical specifications

• Brand / manufacturer: Bently Nevada
• Model: 330104-00-20-10-01-05 (3300 XL 8 mm series)
• Measurement range: 2 mm (80 mils) linear from 0.25 mm to 2.3 mm.
• Output characteristic: -1 to -17 Vdc, recommended gap -9 Vdc (approx. 1.27 mm).
• DC resistance (probe): 7.59 Ω ±0.50 (1.0 m length).
• Frequency response: supports field wiring up to 305 m (1000 ft); see roll-off graphs.
• Operating temperature: standard probe -52 °C to +177 °C (-62 °F to +350 °F).
• Extended cable temp: cable/connector withstand -51 °C to +260 °C.
• Pressure seal: Viton O-ring; differential seal design (not factory tested).
• Humidity resistance: less than 3% ASF change after 56 days, 93% RH (IEC 68-2-3).

Frequently asked questions

What is the linear range of this 3300 XL 8 mm probe?

The 330104-00-20-10-01-05 offers a 2 mm linear range, starting at 0.25 mm from the target and extending to 2.3 mm. This corresponds to approximately -1 to -17 Vdc output.

Can I use this probe with existing 3300 XL monitor systems?

Yes, the 3300 XL 8 mm Proximity Probes series is fully compatible with Bently Nevada 3300 XL Proximitor sensors and monitoring systems. Ubest Automation recommends verifying the total cable length does not exceed 305 meters.

What temperature range does the probe cable handle?

The probe tip operates from -52 °C to +177 °C. The cable and connector extend to -51 °C to +260 °C for the extended temperature range version.

Does the probe include any hazardous location certifications?

Yes, suffix code 05 provides CSA, ATEX, and IECEx approvals for use in Zone 0, Zone 2, and Division 2 locations. Refer to the approval section for full entity parameters.

What is the recommended gap setting for vibration measurement?

Set the gap to -9 Vdc, which corresponds to approximately 1.27 mm (50 mils) from the target surface. This places the probe in the center of its linear range.

How is this probe shipped?

Ubest Automation ships all orders via FedEx, UPS, or DHL. The 330104-00-20-10-01-05 is packaged in anti-static protective material to ensure safe transit.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com Phone: +86 180 3000 5825