{"product_id":"330104-15-25-10-02-05-proximity-probe-bently-nevada","title":"330104-15-25-10-02-05 Proximity Probe - Bently Nevada","description":"\u003ch2\u003e\n\u003cstrong\u003eBently Nevada 3300 XL 8mm Probe – Rugged Proximity Sensor with Hazardous Area Approvals\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct Identification \u0026amp; Complete Suffix Information\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Model:\u003c\/strong\u003e 330104 – 3300 XL 8 mm Probe, M10 x 1 thread, with armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Suffix Code (330104-15-25-10-02-05):\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15\u003c\/strong\u003e = Unthreaded Length: 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25\u003c\/strong\u003e = Overall Case Length: 250 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10\u003c\/strong\u003e = Total Length: 1.0 meter (3.3 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e02\u003c\/strong\u003e = Miniature coaxial ClickLoc connector, standard cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e05\u003c\/strong\u003e = Agency Approval: CSA, ATEX, IECEx (hazardous area certifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eCore Technical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 2 mm (80 mils). It starts at 0.25 mm (10 mils) from target. The range goes from 0.25 mm to 2.3 mm (10 to 90 mils). This corresponds to approximately –1 to –17 Vdc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Gap Setting (Radial Vibration):\u003c\/strong\u003e -9 Vdc. This equals roughly 1.27 mm (50 mils).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal DC Resistance (RPROBE):\u003c\/strong\u003e 7.59 ± 0.50 Ω for the 1.0 meter length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 303 or 304 stainless steel (SST).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Thread:\u003c\/strong\u003e M10x1. Maximum thread engagement length is 15 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Wiring:\u003c\/strong\u003e Use 0.2 to 1.5 mm² (16 to 24 AWG) wire. We recommend 3-conductor shielded triad cable with tinned wiring. Maximum cable length between the \u003cstrong\u003e3300 XL Proximitor Sensor\u003c\/strong\u003e and monitor: 305 meters (1,000 feet).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eEnvironmental \u0026amp; Mechanical Durability\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range (Standard Probe):\u003c\/strong\u003e -52°C to +177°C (-62°F to +350°F) for operating and storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Temperature Range Option:\u003c\/strong\u003e Probe tip works from -52°C to +218°C (-62°F to +425°F). Probe cable and connector handle -51°C to +260°C (-60°F to +500°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Seal Warning:\u003c\/strong\u003e Exposing the probe to temperatures below -34°C (-30°F) may cause premature seal failure. The probe uses a Viton® O-ring to seal differential pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative Humidity Performance:\u003c\/strong\u003e Less than a 3% change in Average Scale Factor (ASF) when tested at 93% humidity for up to 56 days (IEC 68-2-3).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 323 g\/m (11.4 oz per meter).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eHazardous Area Certifications (Agency Approval Option 05)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntrinsically Safe (ia):\u003c\/strong\u003e Install with zener barriers per drawing 141092 or with galvanic isolators. Suitable for Class I, Zone 0 (AEx\/Ex ia IIC T5…T1 Ga); Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Incendive \/ Zone 2 (nA, ec):\u003c\/strong\u003e Install with non-incendive circuit per drawing 140979. Suitable for Class I, Zone 2 (AEx\/Ex nA IIC T5…T1 Gc); Class I, Division 2, Groups A, B, C, D; and Class I, Zone 2 (AEx\/Ex ec llC T5…T1 Gc).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproval Bodies:\u003c\/strong\u003e CSA (Canada), ATEX (Europe), IECEx (International). This probe meets global standards for explosive atmospheres.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I use this \u003cstrong\u003e3300 XL 8mm Probe\u003c\/strong\u003e in explosive dust environments?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The CSA\/ATEX\/IECEx approvals cover Class II (combustible dust) and Class III (fibers\/flyings).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the maximum cable extension from the Proximitor Sensor?\u003c\/strong\u003e\u003cbr\u003eA: You can extend up to 305 meters (1,000 feet) of field wiring. See the frequency response graphs for signal rolloff details.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this probe work with my existing Bently Nevada monitor?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The \u003cstrong\u003e3300 XL 8mm Proximity Probe\u003c\/strong\u003e matches the 3300 XL Proximitor Sensor and all compatible Bently Nevada monitoring systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is the probe pressure tested before shipping?\u003c\/strong\u003e\u003cbr\u003eA: No. Standard probes do not receive a pressure test. Contact our custom design department if you need a pressure seal test for your application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What happens if I expose the probe to -40°C?\u003c\/strong\u003e\u003cbr\u003eA: Temperatures below -34°C (-30°F) may damage the pressure seal. Keep the probe within the rated range of -52°C to +177°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-weight: bold;\"\u003e© 2026 Ubest Automation Limited. \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.ubestplc.com\/\" target=\"_blank\"\u003ehttps:\/\/www.ubestplc.com\/\u003c\/a\u003e All rights reserved.\u003cbr\u003eContact: \u003ca href=\"mailto:sales@ubestplc.com\"\u003esales@ubestplc.com\u003c\/a\u003e | Phone: \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/wa.me\/8618030005825\" target=\"_blank\"\u003e+86 180 3000 5825\u003c\/a\u003e (Click to chat on WhatsApp)\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52078692106522,"sku":"330104-15-25-10-02-05","price":245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0873\/6240\/4634\/files\/330104-15-25-10-02-05.jpg?v=1776136206","url":"https:\/\/www.ubestplc.com\/products\/330104-15-25-10-02-05-proximity-probe-bently-nevada","provider":"Ubest Automation Limited","version":"1.0","type":"link"}