3300 XL 11 mm Proximity Probes – Precision Measurement for Critical Machinery

330704-000-100-10-01-CN comes from Bently Nevada, a leader in machinery protection. This 3300 XL 11 mm Proximity Probes metric model delivers reliable shaft vibration and position data. Ubest Automation provides this new original unit in factory packaging.

Technical Specifications

• Brand: Bently Nevada
• Model: 330704-000-100-10-01-CN – 3300 XL 11 mm Probe with M14 x 1.5 thread and armor
• Unthreaded Length: 00 mm
• Overall Case Length: 100 mm
• Total Length: 1.0 meter (3.3 feet)
• Connector Type: Miniature coaxial ClickLoc connector with connector protector, standard cable
• Agency Approval: Country Specific (Option CN)
• Probe DC Resistance: 5.9 ± 0.5 ohms (center conductor to outer conductor)
• 60 Hz Magnetic Field Immunity: Withstands up to 300 Gauss (5 m system)
  • 0.5 mm gap: 0.001 mil pp/gauss output
  • 2.5 mm gap: 0.009 mil pp/gauss output
  • 4.6 mm gap: 0.027 mil pp/gauss output
• Probe Tip Material: Polyphenylene sulfide (PPS)
• Probe Case Material: AISI 304 stainless steel (SST)
• Cable Specification: 75 Ω triaxial with FEP insulation; available in 1, 5, or 9 meter lengths
• Probe Case Torque: Maximum 63.3 N•m (560 in•lb) | Recommended 21.1 N•m (187 in•lb)
• Thread Size: M14 x 1.5 with maximum thread engagement of 21 mm
• Operating & Storage Temperature: -52°C to +177°C (-62°F to +351°F). Exposure below -34°C may damage the pressure seal.
• Temperature Classification (EPL Ga/Gc): T1 (-55°C to +232°C), T2 (-55°C to +177°C), T3 (-55°C to +120°C), T4 (-55°C to +80°C), T5 (-55°C to +40°C)
• Temperature Classification (EPL Dc): T280°C (-55°C to +232°C), T225°C (-55°C to +177°C), T170°C (-55°C to +120°C), T130°C (-55°C to +80°C), T105°C (-55°C to +100°C), T90°C (-55°C to +40°C)

Complete Suffix Information – Tree Structure

330704-000-100-10-01-CN
├─ Model: 330704 = 3300 XL 11 mm Probe, M14 x 1.5 thread, with armor
├─ Unthreaded Length Option: 000 = 00 mm
├─ Overall Case Length Option: 100 = 100 mm
├─ Total Length Option: 10 = 1.0 meter (3.3 feet)
├─ Connector & Cable Type Option: 01 = Miniature coaxial ClickLoc connector with connector protector, standard cable
└─ Agency Approval Option: CN = Country Specific

Frequently Asked Questions (FAQ)

• Which systems work with the 3300 XL 11 mm probe?
  This probe pairs with Bently Nevada 3300 XL proximity transducer systems and 3300 series monitors for radial vibration, thrust position, and eccentricity measurements.
• Can I extend the cable length on this model?
  The 330704-000-100-10-01-CN comes with a 1.0 meter integral cable. For longer runs, choose 5 or 9 meter versions or use approved junction boxes to maintain signal integrity.
• What approvals does the CN option include?
  Option CN provides country-specific approvals. Please verify the certification with your local requirements before installation.
• What is the recommended installation gap?
  The linear measurement range typically spans from 0.5 mm (20 mils) to 2.5 mm (100 mils). Consult the target material and calibration curve for precise applications.
• How should I clean the probe tip?
  Gently wipe the PPS tip with isopropyl alcohol and a soft cloth. Avoid scratching or damaging the tip surface.

© 2026 Ubest Automation Limited. https://www.ubestplc.com All rights reserved.
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825