330706-005-046-50-02-00 | Bently Nevada 3300 XL 11 mm Reverse Mount Probe

Key Technical Specifications

• Brand & Model: Bently Nevada 330706-005-046-50-02-00 – a genuine 3300 XL series reverse mount probe.
• Total Length Option: 50 = 5.0 meters (16.4 feet). Use this five‑meter probe only with a five‑meter Proximitor Sensor.
• Connector Option: 02 = Miniature ClickLoc™ coaxial connector for secure signal transfer.
• Agency Approval Option: 00 = Not required for this configuration.
• Probe Tip Material: Polyphenylene sulfide (PPS) resists wear and chemicals.
• Probe Case Material: AISI 304 stainless steel (SST) provides excellent corrosion resistance.
• Probe Cable: 75 Ω triaxial, FEP insulated cable. Available lengths: 1, 5, or 9 meters.
• DC Resistance (5.0m length): 7.2 ± 0.8 ohms from center conductor to outer conductor.
• Operating & Storage Temperature: -51°C to +177°C (-60°F to +351°F). Exposing below -34°C (-30°F) may damage the pressure seal.
• Pressure Capability: Seals differential pressure using a Viton® O‑ring. Factory pressure test not included – contact Ubest Automation for custom testing.
• Weight: 0.07 kg for easy handling.

Complete Suffix Information (Tree Structure)

• 330706-005-046-50-02-00
  • 005 = 5.0 meters total length (five‑meter probe)
  • 046 = special probe configuration
  • 50 = unthreaded length option
  • 02 = Miniature ClickLoc™ coaxial connector
  • 00 = No agency approval required
  • Thread type: M10 x 1 threads

Mechanical & Torque Specifications

• Recommended Connector Torque: Finger tight – no tools required.
• Maximum Connector Torque: 0.565 N•m (5 in•lb) to prevent over‑tightening.
• Minimum Bend Radius: 25.4 mm (1.0 inch) – applies with or without stainless steel armor.
• Connector Type: Miniature ClickLoc™ ensures vibration‑resistant connection.
• Probe Family: Perfect for the 3300 XL 11mm Proximity Probe series from Bently Nevada.

Frequently Asked Questions (FAQ)

• Can I use this five‑meter probe with a nine‑meter Proximitor Sensor? No – always pair five‑meter probes with five‑meter Proximitor Sensors only.
• Does the probe come pressure tested from factory? No – standard units do not receive pressure testing. Request a custom test from Ubest Automation if needed.
• What temperature range keeps the pressure seal safe? Avoid operating below -34°C (-30°F) to protect the Viton® seal.
• What does agency approval option 00 mean? This configuration does not require any specific agency approval.
• Is the 330706-005-046-50-02-00 suitable for reverse mounting? Yes – this probe is specially designed for reverse mount applications.

Author: Ubest Automation
© 2026 Ubest Automation Limited. https://www.ubestplc.com All rights reserved.
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825 (WhatsApp)