{"product_id":"330709-000-130-10-02-00-bently-nevada-3300-xl-11-mm-probe","title":"330709-000-130-10-02-00 Bently Nevada 3300 XL 11 mm Probe","description":"\u003ch2\u003e\u003cstrong\u003eBently Nevada 330709-000-130-10-02-00 : 3300 XL 11 mm Proximity Probe\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003e▶ Full Suffix Information (Tree Structure)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330709\u003c\/strong\u003e = 3300 XL 11 mm Probe, M16 x 1.5 thread, without armor\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded Length Option : 000\u003c\/strong\u003e = 00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Case Length Option : 130\u003c\/strong\u003e = 130 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length Option : 10\u003c\/strong\u003e = 1.0 meter (3.3 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector and Cable-Type Option : 02\u003c\/strong\u003e = Miniature coaxial ClickLoc connector, standard cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval Option : 00\u003c\/strong\u003e = Not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e▶ Key Technical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e \u003cstrong\u003e330709-000-130-10-02-00\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.ubestplc.com\/collections\/3300-xl-11-mm-proximity-probes-bently-nevada\"\u003e\u003cstrong\u003e3300 XL 11 mm Proximity Probe\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e 5.9 ± 0.5 ohms (center to outer conductor, length 1.0m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTarget Diameter (Flat Surface):\u003c\/strong\u003e Minimum 30.5 mm (1.2 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e Minimum 152 mm (6.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel (SST)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Specification:\u003c\/strong\u003e 75 Ω triaxial, FEP insulated, total lengths 1, 5, or 9 meters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Torque (Max):\u003c\/strong\u003e 63.3 N•m (560 in•lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Torque (Recommended):\u003c\/strong\u003e 21.1 N•m (187 in•lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Torque:\u003c\/strong\u003e Finger tight (recommended), Max 0.565 N•m (5 in•lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 25.4 mm (1.0 in) with or without SST armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Thread:\u003c\/strong\u003e M16 x 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Thread Engagement Length:\u003c\/strong\u003e 24 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e▶ Environmental \u0026amp; Temperature Ratings\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating \u0026amp; Storage Temp (Probe):\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaution:\u003c\/strong\u003e Temperatures below -34°C (-30°F) may damage the pressure seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Temp Only:\u003c\/strong\u003e -52°C to +105°C (-62°F to +221°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative Humidity:\u003c\/strong\u003e 100% condensing, non-submersible when connectors are protected. Tested to IEC 68-2-3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Seal:\u003c\/strong\u003e Viton O-ring seals differential pressure between probe tip and case. Not factory pressure tested.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e▶ Temperature Classification (EPL Ga\/Gc)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eT1: -55°C to +232°C (Probe only)\u003c\/li\u003e\n\u003cli\u003eT2: -55°C to +177°C (Probe only)\u003c\/li\u003e\n\u003cli\u003eT3: -55°C to +120°C (Probe only)\u003c\/li\u003e\n\u003cli\u003eT4: -55°C to +80°C (Probe only)\u003c\/li\u003e\n\u003cli\u003eT5: -55°C to +40°C (Probe only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e▶ FAQ – Frequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I use this probe in high humidity areas?\u003c\/strong\u003e \u003cbr\u003eA: Yes, it tolerates 100% condensing humidity, but protect connectors from submersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does the probe require a specific target size?\u003c\/strong\u003e \u003cbr\u003eA: Yes, a flat target needs at least 30.5 mm diameter. For shafts, use minimum 152 mm diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the maximum cable length for this model?\u003c\/strong\u003e \u003cbr\u003eA: The \u003cstrong\u003e330709-000-130-10-02-00\u003c\/strong\u003e comes with a 1.0 meter cable. Other lengths (5m, 9m) are available in different suffixes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I expose the probe to temperatures below -34°C?\u003c\/strong\u003e \u003cbr\u003eA: The probe operates down to -52°C, but prolonged exposure below -34°C may cause premature pressure seal failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is the probe pressure tested before shipment?\u003c\/strong\u003e \u003cbr\u003eA: No, Bently Nevada does not pressure test these probes before shipment. Contact Ubest Automation for custom testing requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e© 2026 Ubest Automation Limited. \u003ca href=\"https:\/\/www.ubestplc.com\/\"\u003ehttps:\/\/www.ubestplc.com\/\u003c\/a\u003e All rights reserved.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact:\u003c\/strong\u003e \u003ca href=\"mailto:sales@ubestplc.com\"\u003esales@ubestplc.com\u003c\/a\u003e | Phone: \u003ca href=\"https:\/\/wa.me\/8618003005825\"\u003e+86 180 3000 5825\u003c\/a\u003e (Click to chat via WhatsApp)\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":52119165894938,"sku":"330709-000-130-10-02-00","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0873\/6240\/4634\/files\/330709-000-130-10-02-00.jpg?v=1776913078","url":"https:\/\/www.ubestplc.com\/products\/330709-000-130-10-02-00-bently-nevada-3300-xl-11-mm-probe","provider":"Ubest Automation Limited","version":"1.0","type":"link"}