6ES7153-2BA02-0XB0 Siemens Simatic S7-1500
Manufacturer:
Siemens
Product No.:
6ES7153-2BA02-0XB0
Condition:
In Stock
Product Type:
Drive Interface/Operator
Product Origin:
DE
Weight:
360g
Shipping port:
Xiamen
Warranty:
12 months
UBEST – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
General Information
| Supply Voltage | Rated value (DC): 24 V DC Permissible range: ● Lower limit: 20.4 V ● Upper limit: 28.8 V External protection for power supply lines (recommendation): 2.5 A |
|---|---|
| Mains Buffering | Mains/voltage failure stored energy time: 5 ms |
| Input Current | Current consumption, max.: 600 mA Inrush current, typ.: 3 A I²t: 0.1 A²·s |
| Output Voltage | Rated value (DC): 5 V |
| Output Current | For backplane bus (5 V DC), max.: 1.5 A |
| Power Loss | Power loss, typ.: 5.5 W |
| Address Area | Addressing volume: ● Inputs: 244 byte ● Outputs: 244 byte |
| Hardware Configuration | Number of modules per DP slave interface, max.: 12 |
| Time Stamping | Accuracy: 1 ms ● 1 ms at up to 8 modules ● 10 ms at up to 12 modules Number of message buffers: 15 Messages per message buffer: 20 Number of stampable digital inputs, max.: 128; Max. 128 signals/station; max. 32 signals/slot Time format: RFC 1119 Time resolution: 0.466 ns Time interval for transmitting the message buffer if a message is present: 1 000 ms Time stamp on signal change rising / falling edge as signal entering or exiting |
| Interfaces | Transmission procedure: RS 485 Interface physics, RS 485: Yes Interface physics, FOC: No PROFIBUS DP: ● Node addresses: 1 to 125 permitted ● Automatic detection of transmission rate: Yes ● Output current, max.: 70 mA ● Transmission rate, max.: 12 Mbit/s ● SYNC capability: Yes ● FREEZE capability: Yes ● Direct data exchange (slave-to-slave communication): Yes; Sender ● Design of electrical connection of PROFIBUS interface: 9-pin sub D |
| Protocols | Bus protocol/transmission protocol: PROFIBUS DP to EN 50170 |
| Potential Separation | Potential separation exists: Yes |
| Isolation | Isolation tested with Isolation voltage: 500 V |
| Degree and Class of Protection | IP degree of protection: IP20 |
| Ambient Conditions | Ambient temperature during operation: ● Min.: 0 °C ● Max.: 60 °C Air pressure acc. to IEC 60068-2-13: ● Installation altitude above sea level, max.: 3 000 m |
| Configuration | Configuration software: ● STEP 7: Yes; STEP 7 / COM PROFIBUS / non-Siemens tools via GSD file |
| Dimensions | Width: 40 mm Height: 125 mm Depth: 117 mm |
| Weights | Weight: 360 g |