Technical Specifications

• Model Number: 70085-1010-40430
• Sensor Type: Passive speed sensor
• Output Signal: Analog AC voltage proportional to rotational speed
• Frequency Range: Up to 20 kHz (dependent on gear configuration)
• Sensitivity: Approximately 25 mV to 30 mV per 1000 RPM (typical, based on target geometry and gap)
• Pole Piece Material: High-strength, wear-resistant alloy
• Thread Size: 5/8-18 UNF
• Thread Length: 2.50 inches (63.5 mm)
• Operating Temperature Range: -65°F to +250°F (-54°C to +121°C)
• Target Materials: Ferromagnetic (e.g., steel or iron gears)
• Gap Range: 0.005 inches to 0.050 inches (0.127 mm to 1.27 mm) depending on target size and material
• Cable Length: 3 feet (91 cm) standard, with shielded construction to reduce electrical noise interference
• Connector Type: Pre-wired pigtail or customizable upon request

Applications

1. Rotational Speed Monitoring: Ideal for applications in motors, pumps, and gearboxes.
2. Industrial Machinery: Ensures reliable operation in conveyors, turbines, and compressors.
3. Automotive Testing: Measures wheel or driveshaft speeds in vehicle testing.
4. Aerospace: Monitors rotational components in engines or auxiliary systems.
5. Energy Sector: Suitable for use in turbines and generators for real-time speed monitoring.