Bently Nevada 9200 Series Two-Wire Velocity Transducer

The Bently Nevada 9200-02-05-05-00 measures machine vibration accurately. This two-wire design simplifies installation and reduces costs. It works in tough industrial environments reliably.

Product Configuration Details

• Base Model: 9200 Two-wire Transducer
• Mounting Option: 02 - 45° ±2.5° angle
• Frequency Option: 4.5 Hz minimum operation
• Connector Type: 05 - Terminal block top
• Mounting Base: 05 - No base included
• Stud Size: 1/2-in 20 UNF-3A thread
• Agency Approval: 00 - No certifications
• Product Condition: New factory packaging
• Warranty Coverage: 12 full months

Technical Performance Specifications

• Sensitivity: 20 mV/mm/s ±5% accuracy
• Calibration Load: 10 kΩ termination
• Temperature Effect: 0.2% per °C change
• Displacement Range: 2.54 mm maximum
• Velocity Range: 25 mm/s at 100 Hz
• Coil Resistance: 1.25 kΩ ±5% value
• Coil Inductance: 125 mH typical
• Temperature Range: -29°C to +121°C
• Extended Range: -29°C to +204°C
• Environmental: Dust and moisture proof
• Humidity Level: 95% non-condensing
• Case Material: Anodized aluminum
• Gasket Material: Neoprene seal
• Unit Height: 102 mm typical size
• Body Diameter: 41 mm standard
• Product Weight: 300 grams average
• Frequency Response: 4.5 Hz to 2 kHz
• Phase Response: ±5° from 10-1000 Hz
• Transverse Sensitivity: <3% ratio
• Shock Rating: 500 g survival

Key Benefits & Features

• Two-wire setup cuts installation time
• 45° mounting for flexible positioning
• Terminal block allows easy wiring
• 1/2-in UNF stud for secure mounting
• Low frequency catches slow vibrations
• Aluminum housing resists corrosion
• Neoprene gasket keeps out moisture
• Stable output in temperature changes
• Rugged build for tough conditions
• Works with most monitoring systems

Installation Guide

• Mount at 45° angle as specified
• Use 1/2-in 20 UNF stud for base
• Connect wires to terminal block
• Apply 10 kΩ load for calibration
• Check orientation matches requirement
• Keep cables away from noise sources
• Verify all connections are tight
• Test operation before final use

Package Includes

• One 9200 series transducer unit
• Terminal block connector
• Mounting stud hardware
• Factory test documents
• Installation guide

Shipping & Warranty

• 12-month manufacturer warranty
• FedEx, UPS, DHL shipping
• Express delivery available
• Full tracking provided
• International shipping support

Common Applications

• Industrial machine vibration checks
• Power plant equipment monitoring
• Rotating machinery maintenance
• Structural vibration measurement
• Factory equipment protection

Frequently Asked Questions

• Why choose 45° mounting angle? This angle offers good sensitivity for both vertical and horizontal vibrations. It provides flexible mounting options in tight spaces.
• What does no base mounting mean? The transducer comes without a separate mounting base. You use the built-in 1/2-in UNF stud directly for installation.
• How long does installation take? Typically under 30 minutes. The two-wire design and terminal block make connection quick and simple.
• Can I use this outdoors? Yes, the dust and moisture resistant design works well in outdoor industrial environments.
• What maintenance is needed? Just periodic visual checks for damage. No regular calibration or internal maintenance required.

Contact Information Inquiries:sales@ubestplc.com | +86 18030005825

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
合作伙伴：Powergear X Automation Limited