FANUC A06B-6087-H145: High-Efficiency CNC Power Supply

Power your CNC system with reliable, clean energy. The FANUC A06B-6087-H145 is a robust power supply module. It converts three-phase AC power into stable DC power for servo drives. Features >95% efficiency to reduce energy costs and heat.

Quick Installation Overview

• Mount the unit vertically on a sturdy panel or wall.
• Connect the three-phase AC input (200-240V, 50/60Hz).
• Route the high-power DC output cables to your servo amplifiers.
• Ensure the cooling fan has ample space for air intake and exhaust.
• Verify all electrical connections are tight and secure.

Complete Technical Specifications

FANUC Part Number: A06B-6087-H145
Module Type: Main Switching Power Supply for CNC.
Input Power: 200-240V AC, 3-Phase, 50/60 Hz.
Key Feature: High >95% Power Efficiency.
Cooling: Forced Air Cooling with internal fan.
Output Voltage: Provides stable high-voltage DC bus (typically ~300V).
Output Capacity: Designed to support multiple servo amplifiers in a medium-sized system.
Operating Temp: Range from 0°C to 55°C.
Protection: Comprehensive overload, overcurrent, and overvoltage shutdown.
Mounting: Vertical or wall-mounted installation.
Weight: Industrial build at 45 lbs (20.41 kg).

Expert FAQs for System Integration

Why is a high-efficiency rating important for a power supply?
High efficiency means less electrical energy is wasted as heat. This reduces your machine's operating cost, lowers the cooling requirement for the cabinet, and increases the component's reliability and lifespan.

What happens during an 'overvoltage' condition on the input?
The protection circuit will detect voltage above its safe threshold and will typically shut down the unit to prevent damage to itself and the connected, more expensive servo drives.

Can this unit power a whole CNC machine by itself?
It provides the main DC power for the servo axis drives. The CNC controller, I/O modules, and other electronics usually require separate, lower-voltage power supplies.

The cooling fan has stopped. Can I still run the machine?
Do not run the machine. The fan is critical for removing heat. Operating without it will cause the power supply to overheat quickly, leading to a thermal shutdown or permanent failure.

How do I know the correct size of this power supply for my machine?
The size is determined by the total power consumption of all servo drives. It must be matched to your machine's original specifications. Using an undersized unit will cause constant overload faults.

Warranty & Global Delivery

This power module is covered by a 12-month warranty. We ensure secure and timely delivery via global carriers: FedEx, UPS, and DHL.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Phone: +86 180 3000 5825