FANUC A06B-6096-H102: Alpha Series Servo Drive with FSSB Interface

Get seamless CNC integration with fast digital communication. The FANUC A06B-6096-H102 is an Alpha series servo amplifier. It uses the high-speed FSSB interface for precise control. A reliable, air-cooled drive for various machine tools.

Quick Start Steps

• Mount the drive vertically on a panel or wall inside the control cabinet.
• Connect the main three-phase AC power input (50/60Hz).
• Plug the FSSB fiber optic cable from the CNC into the drive's interface.
• Connect your Alpha series servo motor's power and feedback cables.
• Ensure the cooling fan inlet is clean and has free airflow.

Complete Technical Specifications

FANUC Part No.: A06B-6096-H102
Series & Model: ALPHA SERVO DRIVE MODEL SVM1-20.
Key Interface: High-speed serial FSSB (FANUC Serial Servo Bus) via fiber optic.
Cooling: Internal fan for effective air cooling.
Power Supply: Compatible with standard 50/60 Hz mains frequency.
Mounting: Designed for vertical or wall mounting.
Operating Temp: Reliable from 0°C to 55°C.
Protection: Built-in overload and overcurrent shutdown protection.
Weight: Lightweight at 11 lbs (4.99 kg).
Typical Output Current: As an SVM1-20 model, suitable for mid-range servo motors.
Application: Core component for FANUC CNC systems and machining centers.

Expert FAQs for System Integration

What is the FSSB interface and why is it important?
FSSB is FANUC's high-speed digital network. It uses fiber optics to connect the CNC controller to multiple servo drives with very fast data transfer, enabling precise synchronized motion control and reducing wiring.

Can I replace this drive with a different model if it fails?
You must replace it with the exact same model (A06B-6096-H102) or a FANUC-specified equivalent. The CNC software parameters are tuned for this specific drive and motor combination.

What does the "SVM1-20" model designation tell me?
It identifies this as a "Servo Module" for the Alpha i series. The "20" indicates its relative power size within the SVM1 family, helping you match it to the correct servo motor.

How do I troubleshoot an FSSB communication alarm?
First, check the fiber optic cables for tight connections, bends, or damage. Then, verify the drive's address setting on the rotary switch matches the CNC parameter. Often, the issue is a loose cable.

The cooling fan is noisy. What should I do?
A noisy fan often means it's failing or clogged with dust. Power down the system, clean the fan and heatsinks. If the noise continues, the fan should be replaced to prevent drive overheating.

Warranty & Fast Delivery

This servo drive is backed by a full 12-month warranty. We ship stock items quickly worldwide using FedEx, UPS, and DHL.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Phone: +86 180 3000 5825