ALE111 Ethernet Communication Module Technical Specifications

Model: ALE111
Type: Ethernet Communication Module
Manufacturer: Yokogawa Electric Corporation

General Description:

The ALE111 is an Ethernet communication module designed for use in field control stations (FCS) to facilitate communication with various subsystems such as FA-M3. It is compatible with a range of field control units and bus node units.

Hardware Specifications:

• Physical Layer Interface: IEEE802.3 10BASE-T
• Connection Method: Point-to-point
• Connector Type: RJ-45
• Transmission Method: Half-duplex
• Transmission Speed: 10 Mbps
• Transmission Route: 100 ohm twisted-pair cable (unshielded)
• Transmission Distance: Up to 100 m
• Installation Method: Mountable on various units like ANB10, ANB11, ANR10, etc.
• Number of Ports: One
• Media Access Control: CSMA/CD
• Communication Functions: Supports protocols like Modbus, MELSEC, and others
• Current Consumption: 0.5 A
• Weight: 0.3 kg

Communication Capabilities:

• Communication with FA-M3 and others: Modbus, MELSEC, YFGW, DARWIN/DAQSTATION, PLC-5/SLC500
• Number of Subsystem Stations: Maximum 30
• Communication Protocol: TCP/IP

Operating and Installation Environment:

• Compatible Control Functions: Supports various LFS series control functions for different models of field control stations.
• Dual-Redundancy: Capable of dual-redundant configuration to enhance reliability.

Dimensions:

• Width: 125.5 mm
• Depth: 130 mm
• Height: 32.8 mm

Model and Suffix Codes for ALE111-S00

Model: ALE111-S00 Ethernet Communication Module

Suffix Codes:

• -S: Standard Type
• 0: Basic Type
• 0: Basic Type