Allen-Bradley 20F11ND014AA0NNNNN | PowerFlex 753 Compact 10HP Drive

Need precise control for a smaller motor? This Allen-Bradley drive is built for the job. The 20F11ND014AA0NNNNN delivers 10 HP (7.5 kW) in a space-saving Frame 2 design. It runs on 480V AC 3-phase power. Ideal for small pumps, fans, and conveyor sections.

Top Benefits of This Drive

• Compact Size: Frame 2 enclosure saves valuable space in your control panel.
• Ready to Use: Includes embedded I/O, internal braking, and EMC filtering for simple setup.
• Wide Speed Control: Output frequency from 0 to 599 Hz for flexible application.
• Room to Grow: Three option slots allow you to add features like communication or safety later.
• Rugged & Reliable: Air-cooled and rated for up to 50°C ambient temperature.

Complete Product Specifications

Brand & Model: Allen-Bradley 20F11ND014AA0NNNNN
Product Series: PowerFlex 753 Adjustable Frequency Drive (VFD)
Input Voltage: 480V AC, 3-Phase, 50/60 Hz (or 650V DC bus)
Output Current: 14 Amperes
Output Power: 7.5 kW (10 Horsepower)
Overload Capacity: 110% of rated current for 60 seconds
Output Frequency: 0 to 599 Hz
Control Features: Embedded Digital/Analog I/O
Braking: Internal Dynamic Braking Transistor
Filtering: Built-in EMC Filter (Common Mode Jumper Removed/Active)
Cooling: Air Cooled
Enclosure: Open Type (IP20/IP00, requires a cabinet)
Frame Size: Frame 2
Expansion Slots: 3 Slots for optional modules (e.g., Ethernet/IP, Safe Torque Off)
Ambient Temperature: 0°C to 50°C (32°F to 122°F) for operation
Operator Interface: No built-in keypad (requires separate HIM or software)
Approximate Weight: 9.07 kg (20 lbs)

Simple Installation Steps

1. Mount the 20F11ND014AA0NNNNN drive vertically on a DIN rail inside a protective enclosure.
2. Connect the 3-phase 480V AC power supply to the input terminals (L1/R, L2/S, L3/T).
3. Wire your 3-phase motor to the drive's output terminals (U, V, W).
4. Use the embedded I/O terminals for basic control signals like start, stop, and speed.
5. The internal braking transistor is pre-installed for standard deceleration. Add an external resistor for very fast stops.
6. Install optional cards into the three slots if needed for network communication or safety functions.
7. Configure motor parameters using a laptop with programming software (CCW) or a removable keypad.
8. Perform a low-speed test run without load to confirm proper motor rotation and operation.

Frequently Asked Questions

What size motor can this drive run?
This drive is rated for a 10 HP (7.5 kW) motor. Always match the drive's current rating (14A) to the motor's full-load amp rating, which should be equal to or less than 14A.

What are the three option slots for?
They allow you to add functionality. Common choices are an Ethernet/IP card for networking, a Safe Torque Off (STO) card for safety, or an encoder feedback card for high-precision control.

Can I use this on a 460V supply?
Yes. The 480V AC rating includes a typical tolerance. A 460V supply is well within the operating range of this drive.

How do I change the speed?
You can control speed by sending a 0-10V or 4-20mA signal to the analog input, by using a digital speed preset, or via network commands if you install a communication card.

Is the EMC filter always on?
Yes. The drive ships with the Common Mode Jumper "Removed," which means the filter is active. This is the correct setting for most installations to reduce electrical noise.

What You Get & Our Warranty

You will receive one new Allen-Bradley 20F11ND014AA0NNNNN AC Drive. We offer a straightforward 12-month warranty against any manufacturing defects from your purchase date.

Fast Shipping Options

We ship quickly with reliable carriers. Choose from FedEx, UPS, or DHL at checkout for fast, tracked delivery to your facility.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825