Bently Nevada 3300 NSv Proximity Probe: Precision with Connector Protection

Key Technical Specifications

• Brand & Series: Bently Nevada 3300 NSv Proximity Probe (Part Number: 330910-01-07-10-01-00).
• Complete Suffix Information:
  • 330910 = 3300 NSv Probe, M10X1 thread, with armor.
  • -01 = 10 mm unthreaded length.
  • -07 = 70 mm overall case length.
  • -10 = 1.0 meter (39 in) total length.
  • -01 = Miniature coaxial ClickLoc connector with connector protector, standard cable.
  • -00 = No agency approval required.
• Measurement Range: Offers a full-scale linear range of 1.5 mm (60 mils). The linear range starts at 0.25 mm (10 mils) from the target. The factory-recommended gap setting is 1.0 mm (40 mils).
• Sensitivity & Linearity: Features an Incremental Scale Factor (ISF) of 7.87 V/mm (200 mV/mil). It maintains a deviation from best fit straight line (DSL) of less than ±0.06 mm (±2.3 mils).
• Frequency Response: Supports 0 to 10 kHz with a typical +0, -3 dB response. This performance holds with up to 305 meters (1000 feet) of field wiring.
• Environmental Tolerance: Operates reliably from -52°C to +177°C (-62°F to +351°F). The probe features a PPS tip and a rugged AISI 304 stainless steel case.
• Electrical Characteristics: Probe DC resistance measures 4.2 ± 0.5 ohms. The extension cable has a center conductor resistance of 0.220 Ω/m and a shield resistance of 0.066 Ω/m.

Frequently Asked Questions

• Q: Is this 3300 NSv probe with the connector protector backward compatible?
  A: Yes, it is fully mechanically and electrically interchangeable with previous 3300 RAM probes and existing extension cables.
• Q: What are the field wiring specifications for this probe?
  A: Use a three-conductor shielded triad cable from 0.2 to 1.5 mm² (16 to 24 AWG). The maximum distance to the monitor is 305 meters (1000 feet).
• Q: How does Ubest Automation ship this item?
  A: We ship all orders via reliable, trackable carriers including FedEx, UPS, and DHL to ensure prompt and safe delivery.
• Q: How do I verify this part number matches my system requirements?
  A: Check the suffix: -01 (10mm unthreaded), -07 (70mm case), -10 (1.0m length), and -01 (connector with protector) against your mechanical clearances.

Author: Ubest Automation

© 2026 Ubest Automation Limited. All rights reserved.
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825