Bently Nevada 3300 XL Proximity Probe with Extended Cable

Detailed Configuration & Suffix Code

• ➤ Model: 330708 | 3300 XL 11mm Probe
• ➤ Thread/Armor: 5/8-18 UNF | Without Armor
• ➤ Suffix -00: Unthreaded Length = 0 inch
• ➤ Suffix -10: Overall Case Length = 1.0 inch
• ➤ Suffix -50: Total Cable Length = 5.0 meters (16.4 ft)
• ➤ Suffix -11: Connector = ClickLoc with Protector, FluidLoc Cable
• ➤ Suffix -00: Agency Approval = Not Required

Key Specifications & Product Data

• Brand & Series: Bently Nevada 3300 XL
• Complete Part Number: 330708-00-10-50-11-00
• Probe Diameter: 11 mm | Thread: 5/8-18 UNF
• Electrical System: 75 Ω Triaxial | Cable: FEP Insulated FluidLoc
• DC Loop Resistance (5m): ~5.9 Ω ±0.5 (Typical)
• Frequency Response: 0 to 10 kHz | Linear Range: Up to 2 mm
• Recommended Sensitivity: 200 mV/mil (7.87 V/mm) ±3%
• Operating Temperature: -51°C to +177°C (-60°F to +351°F)
• Probe Case Material: AISI 304 SST | Tip Material: PPS Plastic
• Maximum Case Torque: 45.2 N•m | Recommended: 15.2 N•m
• Pressure Seal: Viton O-ring | Not factory pressure tested

Expert FAQ for the 3300 XL System

• Q: What is the typical output voltage range of this probe system? A: The system typically provides a scale factor of 200 mV/mil within a ±2% linear range.
• Q: Does the FluidLoc cable offer better chemical resistance? A: Yes, the FEP-insulated FluidLoc cable resists oils, fuels, and most industrial chemicals.
• Q: What is the maximum target surface speed for this 11mm probe? A: The 3300 XL probe can reliably monitor surfaces up to 65 feet per second (20 m/s).
• Q: Can I use this probe with a standard 2-wire amplifier? A: No, the 75 Ω triaxial design requires a compatible 3-wire Bently Nevada driver.
• Q: How does the connector protector improve reliability? A: It shields the sensitive contacts from impact, dust, and moisture during handling.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com Phone: +86 180 3000 5825