Product Introduction: The Bently Nevada 3300 XL 11mm Proximity Probe

Complete Model Suffix Breakdown

• Base Model: 330708 - 3300 XL 11 mm Probe, 5/8-18 UNF thread, without armor
• Unthreaded Length (00): 0 inches
• Overall Case Length (24): 2.4 inches
• Total Length (50): 5.0 meters (16.4 feet) - for use with 5m Proximitor only
• Connector & Cable (11): Miniature coaxial ClickLoc with protector, FluidLoc cable
• Agency Approval (00): Not required

Key Technical Specifications

• Brand & Model: Bently Nevada 330708-00-24-50-11-00
• Product Type: 3300 XL 11 mm Proximity Probe
• Probe Tip Material: Polyphenylene sulfide (PPS)
• Probe Case Material: AISI 304 Stainless Steel (SST)
• Cable Specification: 75 Ω triaxial with FEP insulation
• Probe DC Resistance (5m): 7.2 Ω ± 0.8 Ω (center to outer conductor)
• Operating Temperature: -51°C to +177°C (-60°F to +351°F)
• Minimum Bend Radius: 25.4 mm (1.0 inch)

Mechanical & Installation Data

• Probe Case Thread: 5/8-18 UNF
• Max Thread Engagement: 0.938 inches
• Case Torque (Recommended): 15.2 N•m (133 in•lb)
• Case Torque (Maximum): 45.2 N•m (400 in•lb)
• Connector Torque (Recommended): Finger tight
• Connector Torque (Maximum): 0.565 N•m (5 in•lb)

Environmental Tolerance & Notes

• The probe seals differential pressure via a Viton O-ring.
• We do not pressure test probes before shipping them.
• Exposure below -34°C (30°F) may harm the pressure seal.
• The robust design ensures stability in harsh conditions.
• Its wide temperature range suits various applications.

Packaging & Shipping

• Shipping Weight: 0.17 Kg
• Each unit comes in protective packaging.
• We ship globally via FedEx, UPS, and DHL.
• You will receive the probe and connector protector.

Frequently Asked Questions (FAQ)

• Q: What compatible system uses this 5m probe?
  A: This probe requires a matching five-meter Proximitor sensor.
• Q: Can I use this probe for high-pressure applications?
  A: Contact Bently Nevada for custom pressure seal testing.
• Q: What is the probe's electrical resistance?
  A: The 330708-00-24-50-11-00 has 7.2 ± 0.8 ohms resistance.
• Q: How should I install the probe connector?
  A: Hand-tighten the connector; do not exceed 0.565 N•m of torque.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved. Contact: sales@ubestplc.com Phone: +86 8618 3000 5825