Bently Nevada 3300 XL 8mm Long Cable Probe

Complete Product Configuration

• Brand: Bently Nevada
• Model & Base P/N: 3300 XL 8 mm Proximity Probe - 330103
• Full Part Number: 330103-00-07-50-02-00
• -00: Unthreaded Length = 0 mm
• -07: Overall Case Length = 70 mm
• -50: Total Cable Length = 5.0 meters (16.4 feet)
• -02: Connector/Cable = Miniature coaxial ClickLoc, standard cable
• -00: Agency Approvals = Not required

Core Technical Specifications

• Linear Measurement Range: 0.25 to 2.3 mm (10 to 90 mils).
• Recommended Gap Setting: 1.27 mm (50 mils) for approximately -9 Vdc output.
• Nominal Probe Resistance (5.0m cable): 8.73 Ω ± 0.50.
• Frequency Response: Signal roll-off occurs with long cables; consult manual graphs.
• Probe Tip Material: Durable Polyphenylene Sulfide (PPS).
• Probe Case Material: AISI 303 or 304 Stainless Steel.
• Case Thread: M10 x 1 mm.
• Sealing: Viton® O-ring for pressure differential sealing.

Environmental & Operating Details

• Operating Temperature: Standard range from -52°C to +177°C (-62°F to +350°F).
• Extended Temperature Range: Up to +218°C for tip, +260°C for cable/connector.
• Humidity Resistance: Less than 3% ASF change at 93% humidity per IEC 68-2-3.
• Important Note: This 5-meter probe works only with the 5-meter 3300 XL Proximitor sensor.

Frequently Asked Questions (FAQ)

• Q: What is the voltage output range of this probe?
  A: It provides a linear output from approximately -1 to -17 Vdc.
• Q: Is the probe's pressure seal factory tested?
  A: No, probes ship without pressure testing. Contact Bently Nevada for custom tested units.
• Q: Can I use this 5m probe with any monitor?
  A: This 3300 XL probe requires pairing with the matching 5-meter Proximitor sensor only.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com Phone: +86 180 3000 5825