Bently Nevada 3300 XL 8mm Proximity Probe: Model 330102-00-35-10-02-CN

Complete Product Model & Suffix Information

• Brand: Bently Nevada
• Product Type: 3300 XL 8 mm Proximity Probes
• Full Part Number: 330102-00-35-10-02-CN
  • 330102: 3300 XL 8mm Probe, 3/8-24 UNF Thread, Armored Case
  • 00: Unthreaded Length = 0 inch
  • 35: Overall Case Length = 3.5 inch
  • 10: Total Cable Length = 1.0 meter (3.3 feet)
  • 02: Connector = Miniature Coaxial ClickLoc, Standard Cable
  • CN: Agency Approval = Country Specific Approval

Key Technical Specifications & Parameters

• Linear Measurement Range: 2.0 mm (80 mils), from 0.25 mm to 2.3 mm from target
• Recommended Gap Setting (Radial): 1.27 mm (50 mils) for -9 Vdc output
• Nominal Probe DC Resistance (RPROBE): 7.59 Ω ± 0.50 Ω for the 1.0m model
• Frequency Response: Signal roll-off at high frequencies with long wiring; see manual graphs
• Field Wiring Requirements: Use 0.2 to 1.5 mm² (16-24 AWG) 3-conductor shielded cable
• Maximum Field Wiring Length: 305 meters (1000 feet) between probe and monitor
• Probe Tip Material: Polyphenylene sulfide (PPS) for high durability
• Probe Case Material: AISI 303/304 Stainless Steel (SST)
• Sealing: Viton® O-ring for pressure sealing; not factory pressure tested

Environmental & Operational Ratings

• Standard Operating/Storage Temperature: -52°C to +177°C (-62°F to +350°F)
• Extended Temperature Range (Option): Up to +218°C (+425°F) for probe tip, +260°C (+500°F) for cable
• Important Note: Exposure below -34°C (-30°F) may compromise the pressure seal
• Relative Humidity Performance: Less than 3% ASF change at 93% humidity per IEC 68-2-3
• Weight: Approximately 323 grams per meter (11.4 oz/ft)
• Thread Engagement: 3/8-24 UNF thread, maximum engagement of 0.563 inch

Certifications & Hazardous Area Approvals

• With Intrinsic Safety Barriers:
  • Class I, Zone 0: AEx/Ex ia IIC T5...T1 Ga
  • Class I, Div. 1, Groups A, B, C, D & Class II, III Groups
• With Non-incendive Circuits:
  • Class I, Zone 2: AEx/Ex nA/ec IIC T5…T1 Gc
  • Class I, Div. 2, Groups A, B, C, D
• Agency Approval: Country Specific Approval (suffix CN)

Frequently Asked Questions (FAQ)

• Q: What is the output voltage range of this probe?
  • A: The linear output ranges from approximately -1 Vdc to -17 Vdc over 2 mm.
• Q: Can I order a different cable length for this model?
  • A: The suffix '10' fixes the cable at 1.0m. Contact us for other standard lengths like 5m or 9m.
• Q: What does "Country Specific Approval (CN)" mean?
  • A: This probe meets specific certification requirements for certain countries or regions.
• Q: Is this probe suitable for high-pressure environments?
  • A: It has a Viton® O-ring seal, but is not pressure tested. Consult factory for pressure validation.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com Phone: +86 180 3000 5825