Introducing the Bently Nevada 3300 XL 8mm Proximity Probe

Complete Product Suffix Information

The full part number 330102-00-40-10-01-00 details its exact configuration:

• 330102: 3300 XL 8 mm Probe, 3/8-24 UNF Thread, with Armor
• 00: Unthreaded Length = 0 in
• 40: Overall Case Length = 4.0 in
• 10: Total Cable Length = 1.0 meter (3.3 feet)
• 01: Connector Type = Miniature Coaxial ClickLoc with Protector
• 00: Agency Approval = Not Required

Key Technical Specifications

• Brand & Model: Bently Nevada 330102-00-40-10-01-00
• Linear Measuring Range: 2.0 mm (80 mils) from 0.25 to 2.3 mm from target.
• Recommended Gap Setting: 1.27 mm (50 mils) for -9 Vdc output.
• Frequency Response: Dependent on cable length; see manual graphs for details.
• Nominal Probe Resistance: 7.59 Ω ± 0.50 Ω for the 1.0m version.
• Temperature Range:
  • Standard: -52°C to +177°C (-62°F to +350°F)
  • Extended Tip: Up to +218°C (+425°F)
• Pressure Seal: Viton® O-ring; not pressure tested by default.
• Probe Tip Material: Durable Polyphenylene Sulfide (PPS).
• Probe Case Material: AISI 303/304 Stainless Steel.

Installation & Wiring Guidelines

• Use the 3/8-24 UNF thread for mounting.
• Do not exceed 0.563 inches of thread engagement.
• For field wiring, use 0.2 to 1.5 mm² (16-24 AWG) shielded cable.
• Maximum cable run is 305 meters between probe and monitor.
• We recommend a 3-conductor shielded triad for best performance.

Environmental & Safety Ratings

• Relative Humidity: Less than 3% ASF change at 93% humidity.
• Intrinsic Safety (ia): Compliant with Class I, Zone 0, AEx/Ex ia IIC T5...T1 Ga when used with specified barriers.
• Non-Incendive (nA, ec): Suitable for Class I, Zone 2/Division 2 with proper installation.
• Refer to the temperature schedule tables for specific EPL ratings.

Frequently Asked Questions (FAQ)

• What is the standard cable length? This model (330102-00-40-10-01-00) has a fixed 1.0-meter cable.
• Can it be used in high-pressure environments? The probe has a Viton seal but is not pressure tested. Contact us for custom testing.
• What is the optimal gap voltage? Set the gap to achieve approximately -9 Vdc for radial vibration measurements.
• Is it suitable for high-temperature applications? Yes, with an extended tip range up to 218°C.

For more details on the 3300 XL 8mm Probe series, contact our experts. © 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved. Contact: sales@ubestplc.com Phone: +86 86 180 3000 5825