Introducing the 3300 XL 8mm Probe for Precision Machinery Monitoring

Complete Model Suffix Breakdown

• Brand & Series: Bently Nevada 3300 XL
• Model: 330103-00-12-10-12-00
• 330103 = 3300 XL 8 mm Probe, M10x1 thread, without armor
• 00 = Unthreaded Length: 0 mm
• 12 = Overall Case Length: 120 mm
• 10 = Total Cable Length: 1.0 meter (3.3 feet)
• 12 = Connector: Miniature coaxial ClickLoc with FluidLoc cable
• 00 = Agency Approval: Not required

Key Technical Specifications & Performance

• Linear Measurement Range: 2.0 mm (80 mils) from 0.25 mm to 2.3 mm from the target.
• Recommended Gap Setting (Radial): -9 Vdc, which equals approximately 1.27 mm (50 mils).
• Probe Nominal Resistance (RPROBE): 7.59 Ω ± 0.50 Ω for the 1.0-meter cable version.
• Probe Tip Material: Durable Polyphenylene sulfide (PPS).
• Probe Case Material: Corrosion-resistant AISI 303/304 Stainless Steel.
• Case Thread: M10 x 1 with a maximum engagement of 15 mm.
• Sealing: Viton® O-ring for differential pressure sealing.

Environmental Ratings & Durability

• Standard Temperature Range: Operates from -52°C to +177°C (-62°F to +350°F).
• Extended Cable/Connector Range: Handles up to +260°C (-60°F to +500°F).
• Humidity Resistance: Less than 3% ASF change at 93% humidity per IEC 68-2-3.
• Intrinsic Safety (when used with approved barriers): Compliant with AEx/Ex ia IIC T5...T1 Ga for Zone 0.
• Non-incendive Rating (when wired per drawing): Compliant with AEx/Ex nA/ec IIC T5...T1 Gc for Zone 2/Div 2.

Installation & Integration Guidelines

• Use the M10x1 thread for secure mounting with up to 15 mm engagement.
• Set the initial probe-to-target gap to achieve the recommended -9 Vdc output.
• We recommend using shielded triad cable (16-24 AWG) for field wiring.
• The maximum cable run between the proximitor and monitor is 305 meters (1000 feet).
• Longer cable runs may affect high-frequency signal response.
• Avoid exposing the probe to temperatures below -34°C to protect the pressure seal.

What's Included & Shipping

• One (1) Bently Nevada 3300 XL 8mm Proximity Probe, model 330103-00-12-10-12-00.
• The probe comes with a 1.0-meter integrated FluidLoc cable and ClickLoc connector.
• All items ship in protective packaging via FedEx, UPS, or DHL for reliable delivery.

Frequently Asked Questions (FAQ)

• Q: What is the output voltage range for this probe?
  A: The linear output range is approximately -1 to -17 Vdc over the 0.25 to 2.3 mm gap.
• Q: Can this probe handle high-pressure environments?
  A: It has a Viton O-ring seal but is not pressure-tested. Contact Bently Nevada for custom pressure testing.
• Q: Is the cable attached permanently?
  A: Yes, this model features a factory-integrated, 1.0-meter long FluidLoc cable for robust performance.
• Q: What target material should I use for calibration?
  A: Bently Nevada systems are typically calibrated for AISI 4140 steel or a material specified in your API standard.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825