Bently Nevada 3300 XL 8mm Proximity Probe with Extended Cable

Complete Product Model & Suffix Information

• Brand: Bently Nevada
• Base Type: 3300 XL 8 mm Proximity Probes, Metric
• Full Model Number: 330103-10-18-50-01-00
• 330103: 3300 XL 8 mm Probe, M10 x 1 thread, without armor
• 10: Unthreaded Shank Length = 100 mm
• 18: Overall Case Length = 180 mm
• 50: Total Cable Length = 5.0 meters (16.4 feet)
• 01: Miniature coaxial ClickLoc connector with protector, standard cable
• 00: No Agency Approvals Required

Core Technical Specifications

• Linear Measurement Range: 2.0 mm (80 mils), linear from 0.25 mm to 2.3 mm from target.
• Recommended Gap Setting (Radial): 1.27 mm (50 mils) corresponding to -9 Vdc output.
• Probe Tip Material: Robust Polyphenylene sulfide (PPS) for wear resistance.
• Probe Case Material: Machined from AISI 303 or 304 Stainless Steel.
• Pressure Seal: Viton® O-ring seals the probe tip to the case internally.
• Nominal DC Resistance (RPROBE): 8.73 Ω ± 0.50 Ω for the 5.0m cable version.

Environmental & Operational Ratings

• Standard Temperature Range: Operates from -52°C to +177°C (-62°F to +350°F).
• Extended Cable Temperature: Cable and connector rated to +260°C (+500°F).
• Humidity Stability: Less than 3% change in output after 56 days at 93% humidity.
• Important Note: This 5-meter probe requires a matching 5-meter Proximitor sensor.
• Intrinsic Safety Capable: Can be used in hazardous areas with appropriate barrier modules.

Frequently Asked Questions (FAQ)

• What is the target gap for this probe? Always set the gap to achieve -9 Vdc, which is about 1.27 mm from the target surface.
• Can I use this 5m probe with a standard 1m Proximitor? No, you must pair it specifically with a 5-meter Proximitor sensor for correct calibration.
• Does it have ATEX or IECEx certification? This specific suffix (00) does not include agency approvals. Please contact us for certified variants.
• What is the probe's resistance value? The nominal DC resistance for this 5.0m model is 8.73 Ohms ± 0.50 Ohms.
• How is the probe protected during shipping? The ClickLoc connector includes a protective sleeve to prevent damage to the contacts.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com Phone: +86 180 3000 5825