Bently Nevada 3300 XL Standard-Length Proximity Probe

Complete Product Configuration

• Manufacturer: Bently Nevada
• Series: 3300 XL 8mm Proximity Probes, Metric Series
• Full Product Number: 330104-00-12-10-01-00
• Configuration Details:
   ◆ Product Root: 330104 — 3300 XL 8mm Armored Probe, M10x1
    ◆ Suffix 00: Unthreaded Section — 0mm (Fully Threaded)
    ◆ Suffix 12: Case Length — 120mm Standard Size
    ◆ Suffix 10: Cable Length — 1.0 meter (3.3 feet)
    ◆ Suffix 01: Connector — ClickLoc with Protector
    ◆ Suffix 00: Certifications — Standard (No Agency Approvals)

Technical Performance Data

• Probe Diameter: 8.0 mm standard eddy-current design
• Measurement Range: 2.05 mm (0.0807 inches) total span
• Linear Range Start: 0.25 mm (0.010 inches) from target
• Output Voltage Range: -1.2 Vdc to -16.8 Vdc linear signal
• Optimal Operating Point: -8.5 Vdc to -9.5 Vdc at 1.27 mm gap
• Electrical Resistance: 7.59 Ω ± 0.50 Ω (1 meter at 25°C)
• Frequency Response: DC to 12 kHz (-3 dB bandwidth)
• System Sensitivity: 7.9 V/mm (200.7 mV/mil) nominal
• Linearity Error: Better than ±1.8% of full scale
• Measurement Resolution: 0.0004 mm (0.000016 inches)

Environmental & Durability Specifications

• Temperature Range: -52°C to +177°C continuous operation
• Storage Conditions: -62°F to +350°F without performance loss
• Extended Temperature: Available up to +218°C probe tip rating
• Humidity Performance: IEC 68-2-3 compliant, minimal signal drift
• Sealing System: High-grade Viton® O-ring for pressure sealing
• EMI Protection: Double-shielded cable with 90% coverage
• Vibration Tolerance: 10g RMS, 5 Hz to 2 kHz operational
• Shock Resistance: 30g mechanical shock, 6 ms duration

Mechanical Construction Details

• Tip Material: PPS (Polyphenylene sulfide) high-strength plastic
• Case Material: AISI 303/304 stainless steel, polished finish
• Thread Specification: M10 x 1.0 mm pitch, metric fine
• Maximum Engagement: 15 mm recommended thread depth
• Case Dimensions: 120 mm total length from mounting face
• Cable Weight: 323 g/m (0.712 lb/ft) including armor
• Connector System: ClickLoc with rotating protective cover
• Cable Construction: Armored, oil-resistant, flexible design

Electrical & Installation Requirements

• Wire Gauge Range: 16 to 24 AWG (0.2 to 1.5 mm²)
• Cable Type: Three-conductor shielded triad, tinned wires
• Maximum Distance: 305 meters (1000 feet) to proximitor
• Connector Style: Positive-locking ClickLoc miniature coaxial
• Termination Method: Solder or approved crimp connections
• Grounding Practice: Single-point shield ground essential
• Isolation Voltage: 500 VDC minimum cable rating

Technical Application Questions

• What makes the 120mm case length ideal for most applications?
  The 330104-00-12-10-01-00 120mm length provides sufficient clearance for standard bearing housings while maintaining structural rigidity.
• How does the connector protector enhance system reliability?
  The rotating protector prevents accidental disconnection and protects the electrical contacts from contamination in dirty environments.
• What target surface requirements ensure accurate measurements?
  Targets should have surface roughness better than 0.8 μm Ra, be electrically conductive, and measure at least 1.5x probe diameter.
• Can this probe be used for both vibration and position measurement?
  Yes, the 330104-00-12-10-01-00 accurately measures dynamic vibration and static position when properly configured.
• What environmental factors most affect probe performance?
  Extreme temperature cycling, conductive contamination on the probe tip, and strong electromagnetic fields can impact measurement accuracy.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.

Contact: sales@ubestplc.com | Phone: +86 861 800 3000 5825