Bently Nevada 3300 XL Armored Probe for Standard 5m Applications

This is the Bently Nevada 330707-00-10-50-01-00. It is a robust 11mm vibration probe with stainless steel armor. The armor protects the cable from physical damage in busy plants. It has a 5-meter cable and a connector protector. This model is designed for reliable, day-to-day industrial monitoring. It pairs perfectly with your 5-meter Bently Nevada Proximitor sensor.

Product Specifications at a Glance

• Brand & Full Part Number: Bently Nevada 330707-00-10-50-01-00
• Monitoring Platform: 3300 XL Protection System
• Sensor Type: 11mm Eddy Current Proximity Probe
• Key Design: Includes Protective Metal Armor
• Permanent Cable Length: 5.0 meters (16.4 feet)
• Mounting Thread: 1/2-20 UNF (Smaller Diameter)
• Probe Physical Size: 1.0 inch long body
• Operating Environment: -51°C to +177°C full range
• DC Probe Resistance: 7.2 Ohms (with ± 0.8 Ohm tolerance)
• Cable Electrical Spec: 75 Ω Triaxial, FEP Insulated
• Build Materials: 304 SST Case, Wear-Resistant PPS Tip
• Installation Torque (Rec.): 15.2 N•m / 133 in-lb
• Cable Handling: Minimum bend of 1.0 inch (25.4 mm)
• Thread Engagement: Do not exceed 0.750 inches

Part Number Feature Breakdown

• ▸ 330707 – Product Family
  • Describes: 3300 XL, 11mm, 1/2-20 UNF Thread, WITH Armor.
• ▸ 00 – Unthreaded Shank
  • Indicates: 0 inches. The entire mounting section has threads.
• ▸ 10 – Case Dimension
  • Indicates: Overall case length is 1.0 inch.
• ▸ 50 – Pre-Installed Cable
  • Indicates: Fixed 5.0-meter cable length. For use with 5m Proximitor only.
• ▸ 01 – Connection Details
  • Indicates: ClickLoc connector with a protective cap. Standard cable type.
• ▸ 00 – Compliance Level
  • Indicates: Standard industrial model. No special agency certifications.

Quick Installation & Use

Mounting Instructions:

• Ensure the mounting hole has a clean 1/2-20 UNF thread.
• Screw the probe in carefully by hand to start.
• Finish tightening with a torque wrench to 15.2 N•m.
• Ground the cable armor as required by your plant's electrical standards.

Best Used With:

• Bently Nevada monitoring systems using a 5-meter Proximitor.
• Machinery in environments where cables risk being cut or crushed.
• General industrial vibration monitoring on pumps, motors, and fans.

Your Protection & Our Shipping

Warranty Coverage:

• The 330707-00-10-50-01-00 is backed by a full 12-month warranty.
• This warranty protects you against any failure due to manufacturing issues.

Fast & Reliable Delivery:

• Lightweight package: 0.17 kg.
• Shipped globally via express services: FedEx, UPS, and DHL.
• Tracking information is emailed to you immediately after dispatch.

Specialist FAQs

What is the advantage of the 1/2-20 UNF thread over 5/8-18?

The 1/2-20 thread is smaller. It is used where space is limited or for mounting in smaller bore holes on machinery.

Does the armor need to be grounded?

Yes, for safety and to prevent electrical noise. The system installation manual will provide specific grounding instructions.

Can I use this 5m armored probe with a 1m or 9m Proximitor?

No. The electrical calibration is specific. You must pair it with a matching 5-meter Proximitor sensor for accurate readings.

What is the purpose of the connector protector?

The protector shields the delicate electrical pins during shipping and storage. It prevents damage and keeps out dirt before installation.

Is the armored cable more difficult to route and bend?

It is slightly stiffer than a non-armored cable. You should plan your cable route with gentle bends to meet the minimum radius.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Phone: +86 180 3000 5825