Bently Nevada Compact Armored Probe with 5-Meter Reach

The Bently Nevada 330707-00-10-50-02-00 is a unique solution for tight spaces needing long cable runs. It combines a short 1-inch stainless steel case with a 5-meter armored cable. The armor provides excellent physical protection in harsh environments. This probe uses a standard ClickLoc connector for easy setup. It is designed for general industrial applications. This sensor must be used with a 5-meter Proximitor module. It is ideal for compact machinery with distant monitoring panels.

Part Number Breakdown: 330707-00-10-50-02-00

• Product Code [330707]:
  • Series: 3300 XL Condition Monitoring.
  • Type: 11mm Proximity Displacement Probe.
  • Feature: 1/2-20 UNF Thread with Armor.
• Spec -00: Unthreaded Section: 0.0 inch.
• Spec -10: Case Overall Length: 1.0 inch (Short).
• Spec -50: Integrated Cable: 5.0 meters (16.4 ft).
• Spec -02: Connector: Standard ClickLoc Connector.
• Spec -00: Approvals: Not Required.

Complete Technical Specifications

• Brand & Model: Bently Nevada 330707-00-10-50-02-00
• System Platform: 3300 XL Vibration Monitoring
• Measurement Method: Eddy-Current Sensing
• Sensing Face Size: 11.0 mm Diameter
• Body Construction: High-Strength AISI 304 SST
• Tip Material: Durable Polyphenylene Sulfide (PPS)
• Cable Type: 75 Ohm Triaxial
• Cable Protection: Stainless Steel Braided Armor
• Insulation Material: FEP (Fluorinated Ethylene Propylene)
• Total Cable Length: 5.0 Meters (16.4 Feet)
• Electrical Resistance (5m): 7.2 Ohms
• Resistance Tolerance: ± 0.8 Ohms (6.4 to 8.0 Ω)
• Mounting Thread: 1/2-20 UNF
• Alternative Mounting: M16 x 1.5 mm Metric Thread
• Maximum Engagement (1/2-20): 0.750 Inch (19.05 mm)
• Recommended Torque: 15.2 Newton-Meters (133 in-lb)
• Maximum Torque: 45.2 Newton-Meters (400 in-lb)
• Electrical Connection: ClickLock Coaxial Connector
• Connector Installation: Finger Tight Only
• Minimum Bend Radius (Armored): 1.0 Inch (25.4 mm)
• Operating Temperature Range: -51°C to +177°C
• Fahrenheit Equivalent: -60°F to +351°F
• Environmental Seal: Pre-installed Viton O-Ring
• Storage/Handling Warning: Do not handle below -34°C
• Shipment Weight per Unit: Approximately 0.17 kg

Installation Best Practices

• This probe is exclusively for use with 5-meter Proximitor sensors.
• Confirm the 1-inch case will fit your specific mounting hole depth.
• Route the armored cable to avoid areas with extreme abrasion risk.
• Clean all mounting surfaces and threads before installation.
• Start the probe by hand to ensure proper thread alignment.
• Use a torque wrench to tighten to the specified 15.2 N·m.
• Connect the cable with a firm push until the ClickLoc mechanism clicks.
• Allow the probe to reach ambient temperature if stored in cold conditions.

Application & Compatibility

This armored Bently Nevada 330707 probe is compatible with Bently Nevada 3300 XL systems. Its compact design is perfect for applications with severe space constraints, such as in small gearboxes or pumps, where cable protection is also needed.

Warranty Information

We provide a strong 12-month product warranty with this sensor. This warranty covers any defects in materials or factory workmanship for a full year from purchase.

Shipping & Delivery

We ensure fast and reliable global delivery. We ship all orders via FedEx, UPS, and DHL, with comprehensive tracking provided for your convenience.

Technical FAQ

What is the benefit of a 1-inch case with armor?

It allows installation in extremely tight axial spaces while still providing the cable protection of armor. This is for compact yet demanding environments.

Can I use this 5-meter armored probe with a 1-meter proximitor?

No. For accurate system operation and calibration, the probe cable length must match the proximitor cable length. Use only with a 5-meter proximitor.

Is the armored cable also flexible enough for tight routing?

Yes, the armored cable is designed to be flexible while providing protection. Always adhere to the minimum 1-inch bend radius to prevent damage.

What does the "00" approval option mean for this model?

It indicates this probe is intended for use in general industrial areas where specific hazardous location certifications (like ATEX or UL) are not required by local regulations.

How do I clean the armored cable if it gets dirty?

Wipe it with a clean, dry cloth. For oily residues, use a cloth dampened with a mild solvent compatible with FEP insulation. Avoid abrasive cleaners.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825