Bently Nevada 3300 XL 11mm Probe with Extra-Long 9m Cable

This is the Bently Nevada 330707-00-10-90-02-00. It is a standard 11mm vibration probe with a very long cable. The 9-meter (29.5 feet) length provides maximum installation flexibility. It is perfect for installations where the monitor is far from the machine. The stainless steel case ensures durability. Get reliable shaft vibration and position data for your protection system.

Complete Technical Specifications

• Brand & Model Number: Bently Nevada 330707-00-10-90-02-00
• Product Line: 3300 XL Machinery Monitoring
• Sensor Purpose: 11mm Proximity Vibration Sensing
• Key Advantage: Very Long 9-Meter Integrated Cable
• Total Cable Length: 9.0 meters (29.5 feet)
• Mounting Thread Size: 5/8-18 UNF (Standard)
• Probe Body Size: 1.0 inch total length
• Wide Temperature Range: -51°C to +177°C
• Measured DC Resistance: 8.5 Ohms (± 1.1 Ohms)
• System Cable Impedance: 75 Ohms Triaxial
• Construction Material: 304 SST Case, PPS Tip
• Cable Insulation: FEP (Fluoropolymer)
• Recommended Torque: 15.2 N•m (133 in-lb)
• Cable Bend Radius: Min. 25.4 mm (1.0 inch)
• Frequency Response: 0 to 10 kHz typical

Model Suffix Decoder

• ◈ 330707 – Base Configuration
  • Defines: 3300 XL, 11mm, 5/8-18 UNF thread, No Armor.
• ◈ 00 – Unthreaded Probe Length
  • Specifies: 0 inches. The body is completely threaded.
• ◈ 10 – Overall Case Length
  • Specifies: 1.0 inch from the sensing tip.
• ◈ 90 – Pre-Attached Cable
  • Specifies: 9.0 meters of permanent cable.
• ◈ 02 – Connector & Cable Build
  • Specifies: Miniature ClickLoc connector with standard FEP cable.
• ◈ 00 – Agency Certification
  • Specifies: Standard industrial version. No special approvals.

Installation and System Integration

Step-by-Step Mounting:

• Clean and prepare the 5/8-18 UNF mounting hole.
• Screw in the probe by hand first.
• Finally, tighten to 15.2 N•m using a calibrated torque wrench.
• Route the long cable carefully to avoid sharp edges.

Compatibility Check:

• Directly compatible with Bently Nevada 3300 and 3500 series monitors.
• Works with any corresponding proximitor module rated for 11mm probes.
• Ideal for power generation, oil & gas, and heavy industrial applications.

Our Guarantee and Shipping

Warranty Promise:

• We stand behind the 330707-00-10-90-02-00 with a 12-month product warranty.
• This covers any issues related to factory defects or workmanship.

Fast Global Delivery:

• Item ships at a low weight of 0.17 kg.
• We dispatch quickly using reliable partners: FedEx, UPS, and DHL.
• You will receive full tracking details for complete peace of mind.

Technical Questions Answered

What is the main use for a 9-meter cable?

It allows you to place the monitoring rack far from the measurement point. This is common in large machinery halls or for centralized control rooms.

Does the longer cable cause signal loss?

The system is designed for this length. The proximitor module provides compensation to ensure accurate gap voltage measurement.

Can I coil up the extra cable length?

Yes, but coil it neatly in loops larger than 1 foot in diameter. Avoid creating a tight, compact coil which can affect electrical characteristics.

Is this probe suitable for steam turbine applications?

Yes, its temperature rating and construction make it a standard choice for steam turbine vibration monitoring.

What is the difference between the '02' and '11' cable options?

The '02' is a standard FEP cable. The '11' option is a FluidLoc cable, which has better resistance to oils and chemicals.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Phone: +86 180 3000 5825