Bently Nevada Space-Saving Long-Reach Probe with Moisture Guard

The Bently Nevada 330707-00-10-90-11-00 tackles tough installation challenges. It fits into the tightest 1-inch mounting spaces. Yet it delivers a full 9-meter cable reach. The cable features FluidLoc technology to block moisture. A protective shroud shields the connector from damage. This probe is for general industrial wet or cramped areas. Its body is rugged 304 stainless steel. The tip is durable PPS plastic. You must use it with a 9-meter Proximitor sensor. It’s the smart choice for complex layouts.

Understanding Part Number: 330707-00-10-90-11-00

• Core Product [330707]:
  • Series: 3300 XL Monitoring.
  • Type: 11mm Proximity Sensor.
  • Mounting: 5/8-18 UNF, No Armor.
• Designator -00: Unthreaded Section = 0.0 in.
• Designator -10: Case Length = 1.0 in (Miniature).
• Designator -90: Cable = 9.0 m (29.5 ft).
• Designator -11: Connection = ClickLoc with Protector & FluidLoc Cable.
• Designator -00: Approvals = Not Required.

Comprehensive Technical Specifications

• Brand & Complete Model: Bently Nevada 330707-00-10-90-11-00
• Product Family: 3300 XL Vibration Analysis
• Sensing Technology: Eddy-Current Displacement
• Sensing Face: 11.0 mm Diameter
• Housing Material: AISI 304 Stainless Steel
• Tip Material: Polyphenylene Sulfide (PPS)
• Cable Specification: 75 Ohm Triaxial
• Cable Key Feature: FluidLoc Moisture-Wick Barrier
• Insulation Material: FEP (Fluorinated Ethylene Propylene)
• Connector Feature: Integrated Protective Shroud
• Total Extended Length: 9.0 Meters (29.5 Feet)
• DC Resistance Value (9m): 8.5 Ohms
• Tolerance Range: ± 1.1 Ohms (7.4 to 9.6 Ω)
• Primary Thread: 5/8-18 UNF
• Compatible Thread 1: M16 x 1.5 mm
• Compatible Thread 2: M14 x 1.5 mm
• Max Thread Engagement (5/8-18): 0.938 Inch
• Recommended Mounting Torque: 15.2 N·m (133 in-lb)
• Maximum Safe Torque: 45.2 N·m (400 in-lb)
• Electrical Interface: ClickLock Coaxial Connector
• Connector Torque Spec: Hand Tight Only
• Minimum Bend Radius: 25.4 mm (1.0 inch)
• Full Operational Range: -51°C to +177°C
• Seal Type: Factory-Installed Viton O-Ring
• Critical Handling Temp: Do not expose below -34°C (-29°F)
• Unit Shipping Mass: 0.17 Kilograms

Installation & Handling Instructions

• Pair this probe only with a matching 9-meter Proximitor sensor.
• Verify the ultra-short 1-inch case fits your mounting depth.
• The FluidLoc cable is ideal for damp or humid long-run areas.
• Plan the 9-meter cable route carefully to prevent tangles.
• Clean the mounting hole and start the probe by hand.
• Final tighten with a torque wrench to the specified 15.2 N·m.
• Push the shrouded ClickLoc connector in until it clicks securely.
• If the probe is cold, allow it to warm above -34°C before use.

Application & System Fit

This specialized Bently Nevada 330707 probe integrates with 3300 XL systems. It is engineered for applications where axial space is critically limited and the environment is damp, requiring a long cable run.

Warranty Commitment

We back this product with a solid 12-month warranty. This ensures the probe is free from material and workmanship defects for one full year.

Global Shipping

We deliver orders worldwide efficiently. Our trusted carriers are FedEx, UPS, and DHL. You will receive full tracking information for your shipment.

Professional FAQ

What scenario absolutely requires this specific probe configuration?

A wastewater treatment pump with a very narrow bearing housing (needs 1” case) located far from the control building (needs 9m cable) in a humid environment (needs FluidLoc).

How does the FluidLoc feature benefit a 9-meter cable?

Long cables have more surface area exposed to the environment. FluidLoc prevents moisture from migrating along the entire length, protecting the electrical signal integrity.

Can I use this in an area with occasional oil splash?

Yes. The FluidLoc cable and connector shroud offer good protection against incidental oil or coolant contact. It is not for continuous immersion.

Is the 9-meter cable more fragile because it's not armored?

The cable is standard industrial grade with FEP insulation, which is tough. However, for areas with high risk of crushing or cutting, an armored version would be recommended.

What is the first step in planning for this probe's installation?

First, confirm you have a compatible 9-meter Proximitor sensor in your 3300 XL system. Second, physically measure the available depth in your mounting hole.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825